Find Quality Products Online at:
Configure Remote Control Interface
Configure USB Interface
Due to the USB port configured to CDC
USB CDC Class
(Communications Device Class) by default, the
T3PM1100 will appear as a virtual COM port to a
connected PC. Before, hence, using remote control
via CDC USB class, install the appropriate CDC USB
driver available for download on the Teledyne
LeCroy website.
Continue the following setting from SYSTEM
Background
CONFIG setting screen
1. Press Enter button.
Steps
2. Press down arrow key to move
cursor to I/O Model field.
3. Use soft keys to select and confirm
the USB option.
USB
PC connector
Configuration
T3PM1100 connector
Speed
USB Class
Hardware flow control Off
GlobalTestSupply
www.
REMOTE CONTROL
Enter
Type A, host
Rear panel Type B, slave
1.1/2.0 (full speed/high
speed)
CDC (Communications
device class)
109
.com
sales@GlobalTestSupply.com