Juniper ACX7100-32C Hardware Manual page 89

13. (Optional) Configure the static routes to remote prefixes with access to the management port.
[edit]
root@# set routing-options static route remote-prefix next-hop
readvertise
14. Enable Telnet service, if needed.
[edit]
root@# set system services telnet
NOTE: When Telnet is enabled, you cannot log in to the ACX7100-32C through Telnet using
root credentials. Root login is allowed only for SSH access.
15. Enable SSH service.
[edit]
root@# set system services ssh
16. To allow users to log in to the router as root through SSH, include the root-login statement.
[edit system services ssh]
root@# root-login (allow | deny | deny-password)
NOTE: By default, users are not allowed to log in to the router as root through SSH.
17. Commit the configuration. Your changes become the active configuration for the router.
[edit]
root@# commit
destination-ip retain no-
81