Ensure that you have the following parts and tools available to install an SATA SSD in the ACX7100-32C
router:
• ESD grounding strap
• Antistatic bag or an antistatic mat
• Phillips (+) screwdriver, number 1
1. Place the antistatic bag or the antistatic mat on a flat, stable surface.
2. Wrap and fasten one end of the ESD grounding strap around your bare wrist, and connect the other
end of the strap to the ESD point on the chassis.
3. If not already removed, remove the three captive screws securing the SSD cover plate by using the
Phillips (+) screwdriver. The SSD cover plate is located under the chassis (see
Figure 50: Removing the SATA SSD Cover Plate
Figure 50 on page
107).
107