Uninstall The Acx7100-32C Router; Power Off An Acx7100-32C Router - Juniper ACX7100-32C Hardware Manual

4. Slide the drive into the SSD plug and tighten the single screw holding the SATA SSD (see
on page 108).
Figure 51: Installing the SATA SSD
5. Place the SSD cover plate back on the chassis and tighten the three captive screws securing the SSD
cover plate.

Uninstall the ACX7100-32C Router

IN THIS SECTION

Power Off an ACX7100-32C Router | 108

Remove an ACX7100-32C Router from a Rack or Cabinet | 110
Power Off an ACX7100-32C Router
Before you power off an ACX7100-32C router:
• Ensure that you have taken the necessary precautions to prevent electrostatic discharge (ESD)
Prevention of Electrostatic Discharge Damage
damage. See
• Ensure that you do not need to forward traffic through the router.
.
108
Figure 51