General Site Guidelines; Site Electrical Wiring Guidelines - Juniper ACX7100-32C Hardware Manual

Environmental Requirements and Specifications for ACX7100-32C Routers | 35
Grounding Cable and Lug Specifications for ACX7100-32C | 36
Clearance Requirements for Hardware Maintenance of ACX7100-32C Routers | 38
Rack Requirements for ACX7100-32C Routers | 39
Cabinet Requirements for ACX7100-32C Routers | 40

General Site Guidelines

Efficient device operation requires proper site planning and maintenance and proper layout of the
equipment, rack or cabinet (if used), and wiring closet.
To plan and create an acceptable operating environment for your device and prevent environmentally
caused equipment failures:
• Keep the area around the chassis free from dust and conductive material, such as metal flakes.
• Follow prescribed airflow guidelines to ensure that the cooling system functions properly and that
exhaust from other equipment does not blow into the intake vents of the device.
• Follow the prescribed electrostatic discharge (ESD) prevention procedures to prevent damaging the
equipment. Static discharge can cause components to fail completely or intermittently over time.
• Install the device in a secure area, so that only authorized personnel can access the device.

Site Electrical Wiring Guidelines

Table 16 on page 34 describes the factors you must consider while planning the electrical wiring at
your site.
WARNING: You must provide a properly grounded and shielded environment and use
electrical surge-suppression devices.
Avertissement Vous devez établir un environnement protégé et convenablement mis à
la terre et utiliser des dispositifs de parasurtension.
33