Panasonic WH-ADF0309J3E5CM Service Manual page 35

Menu
7 Installer setup Service setup
Pump maximum speed
7.1
To set the maximum speed of
the pump.
Dry concrete
7.2
To dry the concrete (floor, walls,
etc.) during construction.
Do not use this menu for any
other purposes and in period
other than during construction
Default Setting Setting Options / Display
Sterilization: Ope. time (max)
Set sterilizing time
0:10
(in hours and minutes)
Force DHW:Start Temp.
Set auto Force DHW
35 °C
activate temperature
Setting the flow rate, max. duty and operation
ON/OFF of the pump.
Flow rate: XX:X L/min
Max. Duty: 0x40 ~ 0xFE,
Pump: ON/OFF/Air Purge
Edit to set the temperature of dry concrete.
ON / Edit
Edit
Heating temperature
for drying the
Stages: 1 concrete.
Temperature: 25 °C Select the desired
stages: 1 ~ 10,
range: 1 ~ 99
ON
Confirm the setting temperatures of dry
concrete for each stage.
35