Nanoe Tmx Operation - Panasonic WH-ADF0309J3E5CM Service Manual

15.5 nanoe TM X Operation

Generate nanoe TM X (water wrapped ion particle) to moisturize skin, provide deodorization & sterilization effect.

nanoe TM X operation start condition
During unit running at any operation mode, if nanoe
o
(operation mode + nanoe
During unit is OFF, if nanoe
o

nanoe TM X operation stop condition
When OFF/ON button is pressed to stop the operation.
o
When nanoe TM X button is pressed.
o
When OFF Timer activates.
o

nanoe TM X operation pause condition
When indoor fan stop (during deice, odor cut control, thermostat off, etc.). nanoe
o
indoor fan restarts.
When indoor intake temperature ≥ 35°C and ≤ 5°C. nanoe
o
temperature < 35°C or ≥ 5°C continuously for 6 minutes.

Indoor fan control
During any operation mode combines with nanoe
o
However, nanoe
TM
nanoe X system disabled when fan speed < 430 rpm.
TM
During nanoe
o
individual operation is cooling medium fan.

Airflow direction control
During any operation mode combines with nanoe
o
mode.
TM
During nanoe
o

Timer control
When ON Timer activates when unit stops, previous operation resumes and restored last saved nanoe
o
operation status.
When ON Timer activates during any operation, no change on current operation.
o
When OFF Timer activates during any operation, all operation stops and the latest nanoe
o
status is saved.

Indicator
TM
When nanoe X starts, nanoe
o

Remote control receiving sound
Normal Operation
o
TM
nanoe X Operation
o
Stop
o
nanoe TM X individual Operation  Stop
o

Power failure
TM
During nanoe
o
operation resumes immediately.
During combination operation, if power failure occurs, after power resumes, combination operation resume
o
immediately.
TM X operation) starts.
TM X operation is activated, nanoe
TM X system enabled when fan speed ≥ 430 rpm to ensure proper negative ion distribution,
X individual operation, fan speed follow remote control setting. Auto Fan Speed for nanoe
X individual operation, Air Swing follow remote control setting.
TM
X indicator ON.
 nanoe
 Normal Operation
 nanoe
X individual operation, if power failure occurs, after power resumes, nanoe
TM X operation is activated, combination operation
TM X individual operation starts.
TM X operation resume after indoor intake
TM X operation, fan speed follows respective operation mode.
TM
X operation, airflow direction follows respective operation
TM
X Operation
TM
X individual Operation
206
TM X operation resume after
TM
X operation
: Beep
: Beep
: Beep
: Long Beep
TM
X individual
TM
X
TM
X