Panasonic WH-ADF0309J3E5CM Service Manual page 146

12.2.1.5 Mounting
1. Remove the bottom case.
Insert the driver and slightly turn.
*Do not insert the screw driver too deep. Doing so may cause the claw to be broken.
Attention

Mounting the bottom case
Tighten the screws securely until the screw heads touch the bottom case.
o
(Otherwise, loose screw heads may hit the PCB and cause malfunction when mounting the top case.)
Do not over-tighten the screws.
o
(The bottom case may be deformed, resulting in fall of the unit.)

Connecting the remote control wiring
Arrange the wires as shown in the illustration for ⑥ in step 2 and ⑤, avoiding unnecessary wires being
o
stored in the case.
Avoid the wires touching parts on the PCB.
o
Avoid the wires coming in contact with the metallic object protruded from the PCB.
o
(Caught wires may destroy the PCB.)

Mounting the top case
Do not push the top case with excessive force.
o
(Doing so may cause the protrusions of the bottom case to hit and destroy the PCB.)
146