Panasonic WH-ADF0309J3E5CM Service Manual page 160

Wiring as shown below is prohibited.
R1 R2
1 2 1 2
When setting both the main and sub remote controllers
Regarding the contents of the installation, please scan the matrix two-dimensional (2D) barcode and refer to the
detailed manuals.
After installation, set one remote controller to [Main] and the other to [Sub] for [Main/sub] for "Setting".
When using the remote controllers* in combination, set the CZ-RTC6 unit to [Sub].
*CZ-RTC5B
Note
Remote controllers can be connected to any indoor unit for operation.
12.2.3.3 Mounting
1. Remove the top case.

Insert the screwdriver to the bottom case.
Insert the flat-blade screwdriver to the claws as show in the figure.

Push the flat-blade screwdriver in.
Push down the flat-blade screwdriver along with the slope of the claws until the top case comes off .
View A
Top case
Bottom case
Flat-blade screwdriver
Claw
R1 R2 R1 R2
1 2
160