BMW 2 Series Owner's Handbook Manual page 88

CONTROLS
To open the door
▷ Press the button to unlock all the
doors together.
Pull the door handle above the arm-
rest.
▷ Pull the door handle on the door being
opened. The other doors remain locked.
Valet parking mode
Principle
The control display is disabled in valet parking
mode.
This mode can be used, for example, if the ve-
hicle is to be handed over to a parking service.
General
Depending on the national-market version, the
valet parking mode may not be available.
In valet parking mode, the vehicle settings can-
not be changed via iDrive. Settings stored in a
BMW ID or a guest profile cannot be changed.
Personal data cannot be displayed.
In addition, the following actions are per-
formed:
▷ The volume of the audio system is limited.
▷ The Dynamic Stability Control cannot be
turned off.
▷ The availability of certain settings of the
drive modes is restricted.
For further information:
BMW ID/driver profiles, see page 68.
Operating requirements
The driver has registered in the vehicle with a
BMW ID.
Activating valet parking mode
1. "MENU"
2. "Vehicle apps"
88
Opening and closing
Online Edition for Part no. 01405A5E758 - VI/22
3. "System settings"
4. "Valet parking mode"
The luggage compartment is locked and
disconnected from the central locking sys-
tem.
5. If necessary, "PIN"
If the active BMW ID does not have an as-
signed PIN, create a PIN. The PIN is nee-
ded to deactivate the valet parking mode.
6. If necessary, enter the PIN.
7. "Activate valet parking mode"
Deactivating valet parking mode
1. Select the desired BMW ID on the lock
screen.
2. ▷
Enter the assigned PIN for the BMW ID.
If the PIN was forgotten: enter access
data for the BMW ID.
▷ If the selected BMW ID does not have
an assigned PIN: enter access data for
the BMW ID.
Settings
General
Depending on vehicle equipment and national-
market version, various settings are possible
for opening and closing.
Unlocking and locking
Doors
1. "MENU"
2. "Vehicle apps"
3. "Doors and windows"
4. "Lock/unlock"
5. "Unlock"
6. Select the desired setting:
▷ "Driver's door only"