BMW 2 Series Owner's Handbook Manual page 148

CONTROLS
Grey lights
Manual Speed Limiter
Indicator light illuminates: the system is
interrupted.
For further information:
Manual Speed Limiter, see page 201.
Cruise Control
The system is interrupted.
For further information:
Cruise Control, see page 203.
Active Cruise Control with distance
control
Indicator light illuminates: the system is
interrupted.
Indicator light flashes: the requirements
for operation of the system are no longer being
met. The system has been deactivated but will
continue to brake until you actively take over
by depressing the brake or accelerator pedal.
For further information:
Active Cruise Control with distance control, see
page 206.
Lane Departure Warning
Depending on equipment and national-
market version:
Indicator light lights up: the system is
switched off or automatically deactivated, e.g.
because DSC OFF is activated.
Indicator light flashes: a warning is issued
actively. The system does not carry out any
steering interventions.
For further information:
Lane Departure Warning, see page 180.
148
Displays
Online Edition for Part no. 01405A5E758 - VI/22
White lights
Cruise Control with distance control
No display of distance control as the
accelerator pedal is being pressed.
For further information:
Active Cruise Control with distance control, see
page 206.
Check Control
Principle
Check Control monitors vehicle functions and
alerts you to any faults in the monitored sys-
tems.
General
A Check Control message is displayed as a
combination of indicator or warning lights and
text messages in the instrument cluster and, if
applicable, in the Head-up display.
An acoustic signal may also be output and a
text message shown on the control display.
Hiding Check Control messages
An arrow symbol next to the Check Control
message indicates whether the Check Control
message can be hidden.
To hide Check Control messages, press
the left arrow button on the steering
wheel.
Continuous display
Some Check Control messages are displayed
permanently and remain until the fault has
been repaired. If a number of malfunctions
have occurred at the same time, the messages
are displayed in succession.
Permanently displayed Check Control mes-
sages may be temporarily hidden. After ap-