BMW 2 Series Owner's Handbook Manual page 151

Needle in the area of arrow 2: drive power as a
percentage, POWER.
Reduced drive power
The available drive power may be reduced due
to certain factors. The power display is auto-
matically adjusted as necessary.
In addition, icons on the power display and
in the revolution counter indicate if the drive
power has been reduced.
Icon Description
Blue icon: cold drive system.
White icon: increased drive sys-
tem temperature, for example
due to long-lasting or high
power requirements when driv-
ing uphill.
Depending on equipment and
national-market version:
Restriction of drive power set
by BMW Digital Key.
System-related functional limi-
tation.
A Check Control message will
be shown as necessary.
Revolution counter
General
It is vital to avoid rotational speeds in the red
warning zone. In this zone, the fuel supply is
interrupted to protect the engine.
Activating/deactivating the
revolution counter
The revolution counter is displayed depending
on the selected drive mode or the individually
configured layout.
Online Edition for Part no. 01405A5E758 - VI/22
Displays
Reduced speed range
The available speed range may be reduced
due certain factors, example a cold drivetrain.
The revolution counter display is automatically
adjusted depending on the available speed
range.
In addition, symbols in the revolution counter
indicate a reduced engine speed range.
Standby state and drive-
ready state
OFF in the instrument cluster in-
dicates that drive-ready state is
switched off and standby state
is switched on.
The letters READY in the instru-
ment cluster indicate that the
Automatic Start/Stop function is
ready for automatic engine start.
For further information:
▷ Vehicle operating condition, see page 46.
▷ Automatic Start/Stop function, see
page 123.
Engine temperature
Display
▷ Cold engine: the needle is in
the blue temperature range,
close to the limit position
of the temperature display
and the WARM-UP text is
displayed.
CONTROLS
151