BMW 2 Series Owner's Handbook Manual page 68

CONTROLS
Resetting vehicle data
All individual settings can be reset to the
factory settings when drive-ready state is
switched off. The vehicle key must be in the
vehicle.
1. "MENU"
2. "Vehicle apps"
3. "System settings"
4. "Reset vehicle data"
5. "Reset vehicle data"
If synchronisation of settings has been activa-
ted for a BMW ID in the vehicle, the personal
settings are retained in the BMW Cloud.
BMW ID/driver profiles
Principle
In ConnectedDrive countries, the BMW ID is
the personal login for all relevant offers for the
BMW brand. The BMW ID can be used in the
vehicle to store and activate personal vehicle
settings.
In non-ConnectedDrive countries, the personal
vehicle settings can be stored in driver profiles.
General
The BMW ID must be registered once. A BMW
ID can be registered via the BMW app, in the
ConnectedDrive Portal or at the Service Part-
ner.
A driver profile is created in the vehicle.
If a vehicle is used by several people, each
person can create their own BMW ID or driver
profile in order to save their personal settings.
If a BMW ID or a driver profile is activated,
the settings stored therein are applied to the
vehicle.
Many of the settings that are stored for a BMW
ID in the vehicle can be synchronised with the
68
Personal settings
Online Edition for Part no. 01405A5E758 - VI/22
BMW Cloud. This makes these settings avail-
able in any vehicle where the same BMW ID is
used to log in.
The vehicle can store three BMW IDs or three
driver profiles.
Activation of a BMW ID or a driver profile can
already take place when unlocking. For this
purpose, the driver recognition via a vehicle
key or a digital key must be assigned to the
BMW ID or the driver profile.
If no BMW ID or driver profile is activated when
the vehicle is unlocked, the vehicle is in the
guest profile.
Operating requirements
When a BMW ID or driver profile is created,
changed, deleted or edited, the vehicle must
move no faster than at walking speed.
The login in the vehicle with a BMW ID and
synchronisation with the BMW Cloud are only
possible when the vehicle has cellular network
reception.
Welcome window
After unlocking the vehicle, a Welcome window
is shown on the control display. The type of
the welcome depends on the following prereq-
uisite:
▷ The vehicle does not have a stored BMW
ID or driver profile:
The welcome is neutral. An option to add a
BMW ID or create a driver profile is offered.
▷ The vehicle key or the digital key has not
been assigned to a BMW ID or a driver pro-
file:
The welcome is neutral. The stored BMW
IDs or the stored driver profiles are offered
for selection. Additionally, it is possible to
add a new BMW ID or create a new driver
profile.
▷ A BMW ID or a driver profile has not been
assigned to the vehicle key or the digital
key :