BMW 2 Series Owner's Handbook Manual page 181

4. "Driver assistance"
5. "Safety and warnings"
6. "Lane departure warning"
7. "Off"
Setting the Lane Departure Warning
Setting the warning time
1. "MENU"
2. "Vehicle apps"
3. "Driving settings"
4. "Driver assistance"
5. "Safety and warnings"
6. "Lane departure warning"
7. Select the desired setting.
▷ "Early"
▷ "Medium"
▷ "Reduced"
Some warnings are suppressed de-
pending on the situation, for instance,
when purposely driving over driving lane
lines in bends or with dynamic overtak-
ing without turn indicator.
Adjusting the strength of the steering
wheel vibration
1. "MENU"
2. "Vehicle apps"
3. "Driving settings"
4. "Driver assistance"
5. "Feedback via steering wheel"
6. "Vibration intensity"
7. Select the desired setting.
The setting is applied to all collision warning
systems.
Online Edition for Part no. 01405A5E758 - VI/22
Safety
Depending on the national-market
version: switch steering intervention
on/off
1. "MENU"
2. "Vehicle apps"
3. "Driving settings"
4. "Driver assistance"
5. "Safety and warnings"
6. "Lane departure warning"
7. "Steering intervention"
Depending on the national-market version,
steering intervention is automatically active
whenever you drive off.
Display in the instrument cluster
Depending on the equipment and national-
market version, different system statuses are
displayed in the instrument cluster.
Icon Meaning
The icon lights up green: the system
is turned on. A lane boundary has
been detected on at least one side of
the vehicle and the system is ready to
intervene. Warnings are issued.
The icon flashes green: a warning is
actively issued. If necessary, the sys-
tem performs a steering intervention.
The icon lights up yellow: functional
limitation detected, e.g. due to low
sun or system failure. It is possible
to continue driving. Where applicable,
observe the information from Check
Control messages.
The icon flashes yellow: a warning is
actively issued. The system does not
carry out any steering interventions.
CONTROLS
181