BMW 2 Series Owner's Handbook Manual page 345

Care of special parts
Displays, operating elements and
protective glass of the Head-up
display
NOTICE
The surfaces can be damaged by improper
cleaning, e.g. with chemical cleaners, mois-
ture or liquids of all kinds. There is a risk of
material damage.
▷ Avoid applying excessive pressure and
do not use abrasive materials.
▷ Use a dry, clean antistatic microfibre
cloth for cleaning displays.
▷ Clean the operating elements and, de-
pending on the equipment, clean the
protective glass of the Head-up display
using a damp microfibre cloth and com-
mercially available dish-washing soap.
Light alloy wheels
When cleaning the wheels while they are in-
stalled on the vehicle, only use neutral rim
cleaner with a pH value between 5 and 9.
Do not use abrasive cleaners or high-pressure
cleaners above 60 ℃/140 ℉. Observe the
manufacturer's instructions.
Corrosive, acidic or alkaline cleaners may de-
stroy the protective coatings of adjacent parts,
for example brake disc.
After cleaning, briefly apply the brakes to dry
them. The heat generated by braking dries the
brake discs and brake pads and protects them
against corrosion.
Chrome-like surfaces
Chrome-like surfaces, particularly those that
have been exposed to road salt, should be
cleaned carefully with plenty of water, with
added shampoo if required.
Online Edition for Part no. 01405A5E758 - VI/22
Care
Rubber parts
The surfaces of rubber parts can be contami-
nated or lose their shine due to environmental
influences. Only use water and suitable care
products for cleaning.
Rubber parts subjected to high wear and tear
should be treated regularly with rubber care
products. Do not use silicone-based care prod-
ucts for treating rubber seals, otherwise these
could be damaged and become a source of
noise.
Wiper blades
The wiper blades are cleaned by using the
window washer system.
Avoid additional manual cleaning of the wiper
blades to prevent a reduction in wipe quality.
Fine wood parts
Clean fine wood trim and fine wood parts with
a damp cloth only. Then dry with a soft cloth.
Kenaf
Treat parts made from kenaf fibres with a suit-
able care product only.
Plastic parts
NOTICE
Cleaning agents containing alcohol or sol-
vents, for example nitro thinners, cold clean-
ers, fuel or similar can damage plastic parts.
There is a risk of material damage. Clean
with a microfibre cloth. Lightly moisten the
cloth with water if necessary.
Clean with a microfibre cloth.
Lightly moisten the cloth with water if neces-
sary.
Do not soak the headliner.
MOBILITY
345