BMW 2 Series Owner's Handbook Manual page 210

CONTROLS
Switching between Cruise Control
with/without distance control
Safety information
WARNING
The system will not respond to traffic travel-
ling in front of you, but instead maintains the
stored speed. There is a risk of accident or
material damage. Adjust the set speed to the
traffic conditions and brake if necessary.
Switching the Cruise Control mode
To switch Cruise Control without distance con-
trol on and off:
▷ Press and hold the button.
▷ Press and hold the button.
Switch on distance control:
▷ Press the button.
▷ Press the button.
After switching, a Check Control message is
then displayed.
Displays in the instrument cluster
General
Depending on the equipment, the displays in
the instrument cluster may vary.
Display in the speedometer
Depending on the equipment, a mark in the
speedometer displays the status of the sys-
tem.
210
Driver assistance systems
Online Edition for Part no. 01405A5E758 - VI/22
▷ Green marker: system is ac-
tive, the marker shows the
set speed.
▷ Grey marker: system is inter-
rupted; the marker shows the
stored speed.
▷ No marker: system is switched off.
Indicator and warning lights
Depending on the equipment:
Icon Description
White vehicle symbol:
No display of distance control be-
cause the accelerator pedal is being
pressed.
Green icon:
Vehicle ahead detected.
The vehicle symbol goes out if no ve-
hicle in front is detected.
Vehicle symbol flashes green:
Preceding vehicle has driven off.
Grey icon:
System interrupted.
Icon flashes grey:
The requirements for system opera-
tion are no longer being met.
The system has been deactivated
but will continue to brake until you
actively take over by depressing the
brake or accelerator pedal.
Vehicle symbol flashes red and an
acoustic signal sounds:
Brake and take avoidance manoeu-
vre if necessary.