BMW 2 Series Owner's Handbook Manual page 175

Table of Contents

Advertisement

General
Depending on the equipment version, the
front-collision warning system includes the
following functions:
Collision Warning with braking function, see
page 177.
Pedestrian Warning with city braking func-
tion, see page 178.
Safety information
WARNING
The system does not relieve you of your per-
sonal responsibility to assess the traffic situa-
tion correctly. Due to system limits, it cannot
respond independently and appropriately in
all traffic situations. There is a risk of acci-
dent. Adapt your driving style to the traffic
conditions. Observe the traffic situation, be
ready to take over steering and braking at
any time, and actively intervene if the situa-
tion warrants it.
WARNING
Displays and warnings do not relieve you
of your personal responsibility. System limits
can mean that warnings or system respon-
ses are not issued or are issued too late, in-
correctly or for no reason. There is a risk of
accident. Adapt your driving style to the traffic
conditions. Observe the traffic situation and
intervene actively if the situation warrants it.
WARNING
Individual functions may malfunction when
tow-starting or towing away with activa-
ted front-collision warning or Cruise Control
switched on. There is a risk of accident. Turn
off the front-collision warning and Cruise
Control before tow-starting or towing away.
Online Edition for Part no. 01405A5E758 - VI/22
Safety
Sensors
Depending on the equipment, the system is
controlled by the following sensors:
Camera behind the windscreen.
Front radar sensor.
Speed range
The system issues a warning of a possi-
ble risk of collision at speeds above approx.
5 km/h/3 mph.
The system is temporarily disabled at speeds
over approx. 250 km/h, 155 mph.
Some functions are deactivated earlier.
As soon as the speed drops below these val-
ues again, the system is activated.
Turning the front-collision warning
on/off
Switching on the system automatically
Depending on the national-market version, the
system is automatically active after every driv-
ing off.
Switching the system on manually
The system is activated when the warning
time is set.
For further information:
Setting the warning time, see page 176.
Switching the system off manually
Depending on the national-market version, the
setting can only be made at a vehicle standstill
or in the very low speed range.
If necessary, the switch-off must be confirmed
successively on the control display.
1.
"MENU"
2.
"Vehicle apps"
3.
"Driving settings"
4.
"Driver assistance"
CONTROLS
175

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents