BMW 2 Series Owner's Handbook Manual page 245

Table of Contents

Advertisement

Air quality
General
The air quality in the interior is improved by the
following components:
Emissions-tested interior.
Interior filter.
Climate control system for regulating tem-
perature, amount of air and air recirculation
function.
Pre-cooling.
Interior filter
The interior filter cleans the incoming outside
air or the circulated inside air in air recirculation
mode.
Depending on the equipment:
Dust and pollen are filtered out from the
inflowing outside air.
Nano-particle emissions are reduced.
Gaseous pollutants are filtered.
Microbial particles, viruses, and allergens
are filtered.
The vehicle manufacturer recommends having
the interior filter replaced when the vehicle is
serviced.
Pre-cooling
Principle
The pre-cooling allows the temperature of the
interior to be adjusted even before the start of
the journey. Depending on the set temperature
and ambient temperature, the interior is venti-
lated or heated using any available residual
heat from the engine.
General
The system can be switched on and off directly
or for a preselected departure time.
Online Edition for Part no. 01405A5E758 - VI/22
Air conditioning
The switch-on time is calculated based on the
outside temperature. The system will switch
on in good time before the preselected depar-
ture time.
The system switches off automatically after a
while. It continues to run for a short time after it
has been switched off.
Operating requirements
The vehicle is in rest state or standby state.
The vehicle battery must be sufficiently
charged.
When activated, the pre-cooling uses
power from the vehicle battery. As a result,
the maximum operating time is restricted to
protect the vehicle battery. After the engine
is started or after driving a short distance,
the system will be available again.
Time and date are set correctly.
The air vents of the ventilation are open.
Turning the pre-cooling on/off
Turning on/turning off via iDrive
1.
"CLIMATE MENU"
2.
"Settings"
3.
"Auxiliary ventilation"
4.
Select the desired setting.
Departure time
General
To ensure a pleasant interior temperature in
the vehicle at the start of the journey, it is pos-
sible to set different departure times.
One-off departure time: the time can be set.
The system is activated once.
Departure time with day of the week: the
time and day of the week can be set.
The system is switched on before the set
departure time on the required days of the
week.
CONTROLS
245

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents