BMW 2 Series Owner's Handbook Manual page 165

Left-hand/right-hand traffic, see page 166.
Operating requirements
▷ Automatic driving lights control is activated.
▷ The low-beam headlight is switched on.
Activating High-beam Assistant
Press the button on the turn indicator lever.
The indicator light in the instrument
cluster is illuminated when the low-
beam headlight is switched on.
The system will switch automatically between
low-beam headlight and high-beam headlight.
The blue indicator light in the instru-
ment cluster illuminates if the high-
beam headlight is switched on by the
system.
If a journey is interrupted with High-beam As-
sistant activated: when the journey is resumed,
High-beam Assistant remains activated.
The High-beam Assistant is deactivated by
switching the high-beams on and off manually.
To reactivate High-beam Assistant, press the
button on the turn indicator lever.
Online Edition for Part no. 01405A5E758 - VI/22
Lights
Deactivating High-beam Assistant
Press the button on the turn indicator lever.
System limits
High-beam Assistant cannot replace the driv-
er's own judgement as to when to use the
high-beam headlight. Therefore activate the
dipped headlights manually if the situation re-
quires it.
In the following situations, the system will not
operate or its operation will be restricted and
your intervention may be required:
▷ In extremely adverse weather conditions
such as fog or heavy precipitation.
▷ When detecting poorly lit road users such
as pedestrians, cyclists, horse riders or car-
riages and when trains or ships are close to
the road, or when animals are crossing the
road.
▷ On tight bends, on steep brows or hollows
of hills, when there is crossing traffic or if
the view of oncoming vehicles on a motor-
way is partly obstructed.
▷ In poorly lit towns or where there are highly
reflective signs.
▷ If the area of windscreen in front of the in-
terior mirror is covered with condensation,
dirt, stickers, labels, etc.
CONTROLS
165