BMW 2 Series Owner's Handbook Manual page 153

▷ Reduced view.
▷ Trip data, see page 153.
▷ With navigation system: route preview.
▷ With navigation system: map view.
▷ G meter, see page 155.
▷ Entertainment.
Some contents for the central display area can
also be configured as a view in the Head-up
display.
For further information:
Head-up display, see page 142.
Configuring the central display area
The contents for the central indication range in
the instrument cluster can be individually con-
figured, for example, the display of trip data.
1. Press the button on the steering
wheel.
A menu bar is displayed in the instrument
cluster.
2. "CONTENT"
Select the menu using the arrow buttons on
the steering wheel as necessary.
3. Select the required setting using the
knurled wheel on the steering wheel.
Trip data
Principle
The display of trip data provides various infor-
mation about the trip, e.g. the average con-
sumption or the trip distance.
General
The trip data can be shown on the control dis-
play and in the instrument cluster.
Online Edition for Part no. 01405A5E758 - VI/22
Displays
Depending on the setting in the Live Vehicle
menu, the trip data is shown dynamically or
continuously on the control display.
The values can be displayed and reset de-
pending on different intervals.
Display on the control display
General
The following trip data is shown on the control
display:
▷ Set interval for displaying the trip data.
▷ Average fuel consumption as a function
of the set interval.
▷ Driving time depending on the set inter-
val.
▷ Distance covered, depending on the set
interval.
▷ The distance covered in the coasting
drive state.
Displaying trip data continuously
1. "MENU"
2. "Vehicle apps"
3. "Live Vehicle"
4. "Content"
5. "Journey data"
Display in the instrument cluster
Information on consumption and distance cov-
ered can be displayed on the instrument clus-
ter.
CONTROLS
153