BMW 2 Series Owner's Handbook Manual page 47

Establishing rest state on opening
the front doors
After a trip, the rest state can be established
by opening the front doors. For this purpose,
all passengers must exit the vehicle.
1. "MENU"
2. "Vehicle apps"
3. "Doors and windows"
4. "Lock/unlock"
5. "Turn off after opening door"
Establishing the rest state manually
To establish rest state in the vehicle at the end
of the journey:
Press and hold the button on
the radio until the OFF display
on the instrument cluster turns
off.
Standby state
Principle
When standby state is activated, most func-
tions can be operated while the vehicle is still
stationary. Any desired settings can be per-
formed.
General
The vehicle switches to standby state after the
front doors are opened from the outside.
Manually establishing standby state
General
The standby state can be switched on again
after the rest state has been automatically es-
tablished.
Vehicle operating condition
Online Edition for Part no. 01405A5E758 - VI/22
With button on the radio
Press the button on the radio.
The control display and instru-
ment cluster illuminate.
With the Start/Stop button
Press the Start/Stop button. The
control display and instrument
cluster illuminate.
Display in the instrument cluster
OFF is shown in the instru-
ment cluster. The drivetrain is
switched off and standby state
switched on.
Drive-ready state
Principle
Switching on drive-ready state corresponds to
starting the engine.
General
Some functions can only be operated when the
drive-ready state is switched on.
Safety information
DANGER
A blocked exhaust pipe or inadequate ven-
tilation can allow harmful exhaust fumes to
enter the vehicle. The exhaust fumes contain
pollutants which are colourless and odour-
less. In enclosed spaces, exhaust fumes can
also build up outside the vehicle. There is a
CONTROLS
47