BMW 2 Series Owner's Handbook Manual page 108

CONTROLS
Removing the head restraint
Only remove the head restraint if no-one is
intending to sit in the seat in question.
1. Fold down the respective rear seat back-
rest.
To enlarge the luggage compartment, see
page 258.
2. Push the head restraint up until resistance
is felt.
3. Insert the integrated key.
Integrated key, see page 74.
4. Press and hold the integrated key and the
button simultaneously, arrows 1, and pull
the head restraint fully out.
Installing head restraints
To install, insert the head restraint into the
mount and push down until resistance is felt.
After installation, make sure that the head re-
straint engages correctly.
108
Seats, mirrors and steering wheel
Online Edition for Part no. 01405A5E758 - VI/22
Exterior mirrors
General
The exterior mirror adjustment is stored in the
active BMW ID or in the active driver profile. If
the BMW ID or the driver profile is reactivated
at a later time, the stored position is loaded
automatically.
The current exterior mirror adjustment can be
stored using the memory function.
Safety information
WARNING
Objects reflected in the mirror are closer than
they appear. The distance from road users
behind the vehicle could be incorrectly esti-
mated, for example when changing driving
lane. There is a risk of accident. Look over
your shoulder to estimate the distance from
following traffic.
Overview