BMW 2 Series Owner's Handbook Manual page 242

CONTROLS
In the automatic recirculated-air control, out-
side air is drawn in or the interior air is circula-
ted, depending on the outside air quality.
The interior filter cleans the incoming outside
air or the circulated inside air in air recirculation
mode.
Turning the air recirculation function
on/off
1. "CLIMATE MENU"
2. The current operating mode is displayed in
the toolbar. Select the desired setting in the
toolbar:
▷ "Air recirculation"
▷ "Fresh air"
▷ "Auto air recirculation"
Depending on the equipment, the air recircu-
lation function will turn off automatically after
some time depending on the environmental
factors to prevent condensation.
Amount of air
General
The blower-generated air flow can be adjusted
individually as needed.
Adjusting the amount of air
1. "CLIMATE MENU"
2. Amount of air.
3. Select the desired setting.
The amount of air may be reduced in order to
save the vehicle battery power.
Adjusting the amount of air of
the automatic rear air-conditioning
system
Press top or bottom side of button re-
peatedly: reduce or increase amount of
air.
242
Air conditioning
Online Edition for Part no. 01405A5E758 - VI/22
The selected amount of air is shown on the
climate display.
Air distribution
General
In manual mode, the air distribution can be
adjusted as required.
Adjusting the air distribution
1. "CLIMATE MENU"
2. Air distribution.
3. Select the desired setting.
The selected air distribution is displayed.
Adjusting the air distribution,
automatic rear air-conditioning
system
Press the button repeatedly. Select the
desired setting.
The selected air distribution setting is
shown on the climate display.
SYNC programme
Principle
If the SYNC programme is activated, it can be
used to transfer settings on the driver's side to
the passenger's side and to the rear.
General
The following settings can be transferred:
▷ Temperature.
▷ Air distribution.
▷ Automatic programme.