BMW 2 Series Owner's Handbook Manual page 135

Activate Automatic Hold
1. Switch on drive-ready state.
2. Press the button.
The LED is illuminated.
The indicator light illuminates green.
Automatic Hold is activated.
When the vehicle is restarted, the last
selected setting is retained.
Automatic Hold holds the vehicle
Automatic Hold is activated and the driver's
door is closed.
Once the vehicle has stopped, it is au-
tomatically secured from rolling away
once the indicator light lights up green.
Driving off
To drive off, press the accelerator pedal.
The brake is released automatically and the
parking brake indicator light is extinguished.
Automatic parking brake application
The parking brake is applied automatically if
drive-ready state is switched off or the vehicle
is exited while Automatic Hold is holding the
vehicle.
The indicator light changes from green
to red.
The parking brake is not applied automatically
if drive-ready state was switched off while the
vehicle was rolling to a stop. Automatic Hold is
temporarily deactivated in this case.
Deactivate Automatic Hold
Press the key.
The LED is extinguished.
Online Edition for Part no. 01405A5E758 - VI/22
Driving
The indicator light extinguishes.
Automatic Hold is deactivated.
If the vehicle is being held by Automatic Hold,
also depress the brake when deactivating.
Turn indicators
Turn indicator in exterior mirror
To ensure that the indicator lamps in the ex-
terior mirrors can be seen, do not fold in the
exterior mirrors while driving and while the turn
indicators or hazard warning lights are operat-
ing.
Indicating
Press the lever beyond the resistance point.
One-touch signalling
Briefly tap the lever up or down.
The duration of the one-touch signalling can
be set.
1. "MENU"
2. "Vehicle apps"
3. "Exterior lighting"
4. If necessary, "Additional settings"
5. "One-touch indicator"
6. Select the desired setting.
CONTROLS
135