BMW 2 Series Owner's Handbook Manual page 86

CONTROLS
Deleting digital keys
General
Deleted digital keys are removed from the list
of enabled digital keys.
Deleted digital keys cannot be restored.
Deleting the digital master key
The digital master key can be deleted from the
smartphone or via iDrive.
The deletion of the digital master key is com-
pleted immediately.
Deleting a shared key
Shared keys can be deleted via the smart-
phone associated with the main digital key, via
the smartphone associated with a shared key
or in iDrive.
A shared key will only be deleted via the
smartphone associated with the main digital
key if the vehicle is being used with a key other
than the one that is to be deleted.
If the smartphone associated with a shared
key or iDrive is used to delete a shared key, it
will be deleted immediately.
Deletion in iDrive
To enable a digital key to be deleted in iDrive,
there must be an authorised vehicle key in the
vehicle or the main key must be in the smart-
phone tray.
1. "MENU"
2. "Vehicle apps"
3. "Doors and windows"
4. "Digital Key"
5. Select a digital key as necessary.
6. Delete the Digital Key.
Resetting the function
To reset BMW Digital Key function, there must
be an authorised vehicle key in the vehicle.
86
Opening and closing
Online Edition for Part no. 01405A5E758 - VI/22
All digital keys, including the main key, are de-
leted when the BMW Digital Key function is
reset. The digital key of the Key Card is not
deleted.
Following the reset, it will no longer be possi-
ble to lock, unlock or start the vehicle with a
digital key.
The main digital key must be enabled again in
order to be able to use BMW Digital Key again.
1. "MENU"
2. "Vehicle apps"
3. "Doors and windows"
4. "Digital Key"
5. "Reset function"
Unlocking and locking the vehicle
The vehicle can be unlocked and locked using
the outside door handle.
For further information:
Access to the vehicle interior, see page 78.
Switching on drive-ready state
Using the smartphone tray
1. Open the cover of the smartphone tray.
2. Place the smartphone in the middle of the
smartphone tray.
Make sure that the display is pointing up-
wards.
3. Close the cover of the smartphone tray.
4. Press the Start/Stop button to turn on the
drive-ready state.