Engine - Konica Minolta Magicolor 3300 User Manual

Engine

Engine
Standard
average duty
cycle
Printer type
Print method
Resolution
Toner
Warm-up
Input sources
Output
Media sizes/
weights
Media type
Notes
Engine and Controller Specifications
Fuji-Xerox Hibana
3,000 simplex letter/A4 pages per month
The duty cycle is affected by the media type and percent
coverage.
Desktop, tandem, color laser marking engine
Scanner: Semiconductor laser with rotating mirror
Recorder: Black writing electrophotographic
Process: Cyan, magenta, yellow, and black toner image
transfer to print media
Fuser: Heated rollers
600 x 600 dpi (default)
1200 x 1200 dpi
You may also need additional memory (DIMMs) for the
following:
To print at maximum performance
To print complex graphics or complex PostScript
documents
For increased collation performance
For increased spooling performance
Type: Chemical-type
Packaging: User-replaceable toner cartridges
Keyed toner cartridges are available from your local
vendor or from www.q-shop.com.
Typical: 1.5 minutes from power on, assuming normal
temperature and humidity.
After New Imaging Unit Installed: 6 minutes.
Standard: 100-sheet (face up) multipurpose tray
500-sheet (face down) upper tray
Optional: One 500- sheet (face down) tray in the 1x500
high-capacity input feeder
Two 500-sheet (face-down) trays in the 2x500
high-capacity input feeder
250-sheet (face down) output tray on top of printer
See "Media Sizes and Print Area" on page 19.
Cut-sheet
The maximum media weight supported for duplex printing
is 28 lb bond (105 g/m
2
).
157