Konica Minolta Magicolor 3300 User Manual page 77

3
Lift the clip at the end of the media
feed rollers
media feed rollers
4
Align the new media feed rollers' axis with the shaft in the media tray as
illustrated and slide the shaft through the roller until the clip locks into the
groove at the end of the shaft.
5
Close the media feed rollers cover
6
Hold the media tray with both hands,
align it with the opening in the printer
and gently insert it.
7
Push the media tray completely back
into the printer.
8
If you have a high-capacity input
feeder (HCIF), repeat steps 1–8 for
each media tray.
9
Turn the printer on.
10
For both the fuser and the media feed rollers, in the Operator Control/
Consumables/Item Replaced/Fuser menu, choose Yes to reset the
consumables usage monitoring system.
You must manually reset the consumables usage monitoring
system to ensure accurate consumables monitoring.
Replacing the Fuser Unit
, and remove the
.
.
2
3
1
69