Konica Minolta Magicolor 3300 User Manual page 127

This message...
ENERGY SAVER
EXTENDED ACC
FILE SIZE BY
<%D> KB
FRONT COVER
OPEN
FUSER LIFE LOW
FUSER UNIT
MISSING
IDLE
Status, Error, and Service Messages
means...
The printer is in energy
saver mode to reduce
power consumption dur-
ing periods of inactivity.
When a print job is
received, the printer
returns to normal power
within 90 seconds.
While in "deep sleep,"
the printer's message
window will not display
operator status such as
door- and tray-open
messages. The printer
remains in "deep sleep,"
until a print job is
received, or until the
printer is manually
switched from offline to
online.
The <%D> (size of the
non-empty accounting
file) has been increased
successfully.
The cover is open and
must be closed.
The fuser unit life is low. Replace the fuser unit
The fuser is not fully
seated.
The printer is on line,
but no jobs are in pro-
cess.
do this...
No action needed.
No action needed.
Close the cover.
and media feed roller.
Reset the consumables
count in the Operator
Control/Consumables/
Item Replaced/Fuser
menu.
Make sure the fuser is
fully seated.
No action needed.
119