SOFTWARE LICENSE AGREEMENT This package contains the following materials provided by Konica Minolta Business Technolo- gies, Inc. (KMBT): software included as part of the printing system, the digitally-encoded machine-readable outline data encoded in the special format and in the encrypted form (“Font Programs”), other software which runs on a computer system for use in conjunction with the...
Page 4
“Component” Bonjour Pursuant to the license terms below, Konica Minolta Business Technologies, Inc. hereby (a) disclaims on behalf of Contributor all warranties and conditions, express or implied, including warranties or conditions of title and non-infringement, and implied warranties of merchantability...
Page 5
“Source” form shall mean the preferred form for making modifications, including but not limited to software source code, documentation source, and configuration files. “Object” form shall mean any form resulting from mechanical transformation or translation of a Source form, including but not limited to compiled object code, generated documentation, and conversions to other media types.
Page 6
4. Redistribution. You may reproduce and distribute copies of the Work or Derivative Works thereof in any medium, with or without modifications, and in Source or Object form, provided that You meet the following conditions: a. You must give any other recipients of the Work or Derivative Works a copy of this License; b.
8. Limitation of Liability. In no event and under no legal theory, whether in tort (including neg- ligence), contract, or otherwise, unless required by applicable law (such as deliberate and grossly negligent acts) or agreed to in writing, shall any Contributor be liable to You for dam- ages, including any direct, indirect, special, incidental, or consequential damages of any char- acter arising as a result of this License or out of the use or inability to use the Work (including but not limited to damages for loss of goodwill, work stoppage, computer failure or malfunction,...
Page 8
Part 2: Networks Associates Technology, Inc copyright notice (BSD) Copyright (c) 2001-2003, Networks Associates Technology, Inc All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
Page 9
OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Part 4: Sun Microsystems, Inc. copyright notice (BSD) Copyright (c) 2003 Sun Microsystems, Inc., 4150 Network Circle, Santa Clara, California 95054, U.S.A. All rights reserved. Use is subject to license terms below.
Page 10
LAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEM- PLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCURE- MENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABIL- ITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF...
Contents 1 Operation on Mac OS X ................. 1-1 System Requirements for the Printer Driver ..........1-2 Installing the Printer Driver ................1-3 Installing Ghostscript................... 1-3 Installing the Printer Driver................1-7 Uninstalling the Printer Driver ..............1-11 Print Center Settings (Mac OS X 10.2.8) ............ 1-13 When Using a USB Connection ..............
Page 12
When Using a Network Connection ............1-36 Bonjour Setting ................... 1-36 IP Printing Setting ................1-38 Printer Settings (Mac OS X 10.5/10.6) ............1-41 When Using a USB Connection ..............1-41 When Using a Network Connection ............1-44 Bonjour Setting ................... 1-44 IP Printing Setting ................
Page 13
Watermark Selection................1-85 Watermark Orientation................ 1-86 Watermark Setting ................1-87 Supply Levels.................... 1-88 Summary....................1-89 Troubleshooting ..................1-90 2 Printer Utilities ....................2-1 Installing Printer Utilities on Windows ............2-2 3 Understanding the Ethernet Configuration Menus ........3-1 Ethernet Menu ....................3-2 Location within the Configuration Menu ............
Page 14
Adding an IPP Port using Add Printer Wizard - Windows 7/Vista/Server 2008............. 4-15 Troubleshooting ..................4-20 5 Using PageScope Web Connection ............. 5-1 About PageScope Web Connection ............. 5-2 Display Language ..................5-2 Requirements....................5-2 Setting Up the Printer Web Page ..............5-4 Determining the Printer Name..............
System Requirements for the Printer Driver Before installing the printer driver, make sure that your system meets the fol- lowing system requirements. Computer Apple Macintosh computer installed with the following processor: - PowerPC G3 or later processor (PowerPC G4 or later is recommended) - Intel processor Connecting the computer USB connection, Network connection...
Installing the Printer Driver You must have administrator privileges in order to install the printer driver. Before proceeding with the installation, be sure to exit all running applications. Installing Ghostscript If you are using Mac OS 10.3 or later, skip to “Installing the Printer Driver” on page 1-7.
Click Continue. Check the details of the license agreement and click Continue. Installing the Printer Driver...
Page 20
Click Agree in the confirmation dialog box, if you agree to the terms of the license. In the Select a Destination page, select the disk in which you wish to install the software, and then click Continue. Installing the Printer Driver...
Page 21
Click Install in the Easy Install page. Installation starts. After the installation has been completed, click Close. This completes the installation of Ghostscript. Installing the Printer Driver...
Page 22
Installing the Printer Driver The procedure for installing the printer driver on Mac OS X 10.5 is described below. The following procedure or some steps may be dif- ferent depending on the version of the operating system being used. Complete the installation according to the instructions in the dialog boxes that appear.
Page 23
Click Continue. Click Continue. Installing the Printer Driver...
Page 24
Click Agree in the confirmation dialog box if you agree to the terms of the license. Click Install in the Standard Install page. Installing the Printer Driver...
Page 25
Enter the administrator user name and password in the Authenticate dia- log box, and then click OK. Installation starts. After the installation has been completed, click Close. This completes the installation of the printer driver. 1-10 Installing the Printer Driver...
Uninstalling the Printer Driver Insert the CD/DVD in the CD/DVD-ROM drive of your Macintosh. Double-click the CD icon on the desk top, drivers folder, mac OSX folder, and then double-click the magicolor3730-x.x.x-ppc-i386.dmg disk image file. The disk image appears on the desktop. Double-click the magicolor 3730 Uninstaller file in the disk image.
Page 27
After the uninstallation has been completed, click Close. This completes the uninstallation of the printer driver. 1-12 Uninstalling the Printer Driver...
Print Center Settings (Mac OS X 10.2.8) When Using a USB Connection Use a USB cable to connect the printer to your computer. Check that the printer is turned on, and then restart the computer. Open Print Center, which can be accessed by clicking Startup Disk, then Applications, then Utilities.
Page 29
If magicolor 3730 does not appear, check that the printer is turned on and the USB cable is connected, and then restart the computer. Select KONICA MINOLTA from the Printer Model pop-up menu. Select KONICA MINOLTA magicolor 3730 in the Name list.
Click Add. The new printer appears in the Printer List screen. When Using a Network Connection The network connection settings can be specified in one of four ways: Rendezvous setting, IP printing setting, IPP setting and Specifying Port 9100. Rendezvous Setting Connect the printer to an Ethernet network.
Page 31
Select Rendezvous from the pop-up menu. Select KONICA MINOLTA magicolor 3730 (xx:xx:xx). "xx:xx:xx" refers to the last six digits of the MAC address (in hexadeci- mal). Select KONICA MINOLTA from the Printer Model pop-up menu. 1-16 Print Center Settings (Mac OS X 10.2.8)
Page 32
Select KONICA MINOLTA magicolor 3730 in the Model Name list. Click Add. The new printer appears in the Printer List screen. Print Center Settings (Mac OS X 10.2.8) 1-17...
IP Printing Setting Connect the printer to an Ethernet network. Open Print Center, which can be accessed by clicking Startup Disk, then Applications, then Utilities. Click Add in the Printer List. Select IP Printing from the pop-up menu. 1-18 Print Center Settings (Mac OS X 10.2.8)
Page 34
Clear the Use default queue on server check box. Enter "lp" in the Queue Name text box. Select KONICA MINOLTA from the Printer Model pop-up menu. Select KONICA MINOLTA magicolor 3730 in the Model Name list. Print Center Settings (Mac OS X 10.2.8) 1-19...
Click Add. The new printer appears in the Printer List screen. IPP Setting Connect the printer to an Ethernet network. Open Print Center, which can be accessed by clicking Startup Disk, then Applications, then Utilities. In the Printer List, click Add while pressing the Option key in the key- board.
Page 36
Select Advanced from the pop-up menu. Select Internet Printing Protocol (http) from the Device pop-up menu. Print Center Settings (Mac OS X 10.2.8) 1-21...
Page 37
Enter the name for the printer in the Device Name text box. In the Device URI text box, enter "http://<IP address>/ipp". Select KONICA MINOLTA from the Printer Model pop-up menu. 1-22 Print Center Settings (Mac OS X 10.2.8)
Select KONICA MINOLTA magicolor 3730 in the Name list. Click Add. The new printer appears in the Printer List screen. Specifying Port 9100 Connect the printer to an Ethernet network. Open Print Center, which can be accessed by clicking Startup Disk, then Applications, then Utilities.
Page 39
In the Printer List, click Add while pressing the Option key in the key- board. Select Advanced from the pop-up menu. Select AppSocket/HP JetDirect from the Device pop-up menu. 1-24 Print Center Settings (Mac OS X 10.2.8)
Page 40
Enter the name for the printer in the Device Name text box. In the Device URI text box, enter "socket://<IP address>". Select KONICA MINOLTA from the Printer Model pop-up menu. Select KONICA MINOLTA magicolor 3730 in the Name list. Print Center Settings (Mac OS X 10.2.8)
Page 41
Click Add. The new printer appears in the Printer List screen. 1-26 Print Center Settings (Mac OS X 10.2.8)
Printer Setup Utility Settings (Mac OS X 10.3) When Using a USB Connection Use a USB cable to connect the printer to your computer. Check that the printer is turned on, and then restart the computer. Open Printer Setup Utility, which can be accessed by clicking Startup Disk, then Applications, then Utilities.
Page 43
Select magicolor 3730 in the Product list. If magicolor 3730 does not appear, check that the printer is turned on and the USB cable is connected, and then restart the computer. Check that KONICA MINOLTA magicolor 3730 is selected in the Printer Model list. Click Add.
When Using a Network Connection The network connection settings can be specified IP printing Setting (IPP, LPD or Socket). Rendezvous Setting Connect the printer to an Ethernet network. Open Printer Setup Utility, which can be accessed by clicking Startup Disk, then Applications, then Utilities. Click Add in the Printer List.
Select KONICA MINOLTA magicolor 3730 (xx:xx:xx) in the Name list. "xx:xx:xx" refers to the last six digits of the MAC address (in hexadeci- mal). Check that KONICA MINOLTA magicolor 3730 is selected in the Model Name list. Click Add. The new printer appears in the Printer List screen.
Page 46
Click Add in the Printer List. Select IP Printing from the pop-up menu. Select desired print protocol from the Printer Type pop-up menu. - For an LPD setup, select LPD/LPR. - For an IPP setup, select Internet Printing Protocol. - For a port 9100 setup, select Socket/HP Jet Direct. Printer Setup Utility Settings (Mac OS X 10.3) 1-31...
Page 47
- For an LPD setup, "lp" in the Queue Name text box. - For an IPP setup, "ipp" in the Queue Name text box. Select KONICA MINOLTA from the Printer Model pop-up menu. Select KONICA MINOLTA magicolor 3730 in the Model Name list. Click Add. 1-32...
Page 48
The new printer appears in the Printer List screen. Printer Setup Utility Settings (Mac OS X 10.3) 1-33...
Printer Setup Utility Settings (Mac OS X 10.4) When Using a USB Connection Use a USB cable to connect the machine to your computer. Open Printer Setup Utility, which can be accessed by clicking Startup Disk, then Applications, then Utilities. In the Printer List, click Add.
Page 50
If magicolor 3730 does not appear, check that the machine is turned on and the USB cable is connected, and then restart the computer. Check that KONICA MINOLTA magicolor 3730 is selected in the Print Using list. Click Add. The new printer appears in the Printer List screen.
When Using a Network Connection The network connection settings can be specified in one of two ways: Bonjour Setting and IP printing Setting (IPP, LPD or Socket). Bonjour Setting Connect the machine to an Ethernet network. Open Printer Setup Utility, which can be accessed by clicking Startup Disk, then Applications, then Utilities.
Page 52
- Specifies the printer's location in the Location text box. “xx:xx:xx” refers to the last six digits of the MAC address (in hexa- decimal). Check that KONICA MINOLTA magicolor 3730 is selected in the Print Using list. Click Add. Click Continue.
IP Printing Setting Connect the machine to an Ethernet network. Open Printer Setup Utility, which can be accessed by clicking Startup Disk, then Applications, then Utilities. Click Add in the Printer List. Click IP Printer. 1-38 Printer Setup Utility Settings (Mac OS X 10.4)
Page 54
Select desired print protocol from the Protocol pop-up menu. - For an IPP setup, select Internet Printing Protocol - IPP. - For an LPD setup, select Line Printer Daemon - LPD. - For a port 9100 setup, select HP Jet Direct - Socket. Printer Setup Utility Settings (Mac OS X 10.4) 1-39...
Page 55
- For an IPP setup, "ipp" in the Queue Name text box. - Specifies the printer's name in the Name text box. - Specifies the printer's location in the Location text box. Check that KONICA MINOLTA magicolor 3730 is selected in the Print Using list. Click Add.
Printer Settings (Mac OS X 10.5/10.6) The procedure for Printer Settings on Mac OS X 10.5 is described below. The following procedure or some steps may be different depending on the version of the operating system being used. When Using a USB Connection Use a USB cable to connect the printer to your computer.
Page 57
The detected printer appears in the Printer Browser. Select KONICA MINOLTA magicolor 3730 in the Printer Name list. 1-42 Printer Settings (Mac OS X 10.5/10.6)
Page 58
If KONICA MINOLTA magicolor 3730 does not appear, check that the printer is turned on and the USB cable is connected, and then restart the computer. Check that KONICA MINOLTA magicolor 3730 is selected in the Print Using list. Click Add.
When Using a Network Connection The network connection settings can be specified in one of two ways: Bonjour Setting and IP printing setting (IPP, LPD or Socket). Bonjour Setting Connect the machine to an Ethernet network. Select System Preferences from the Apple menu. Click Print &...
Page 60
The detected printer appears in the Printer Browser. Select KONICA MINOLTA magicolor 3730 (xx:xx:xx) in the Printer Name list. “xx:xx:xx” refers to the last six digits of the MAC address (in hexadeci- mal). Printer Settings (Mac OS X 10.5/10.6) 1-45...
Check that KONICA MINOLTA magicolor 3730 is selected in the Print Using list. Click Add. Click Continue. The new printer appears in the Print & Fax screen. IP Printing Setting Connect the machine to an Ethernet network. Select System Preferences from the Apple menu.
Page 62
In the Print & Fax, click + button. Click IP. Printer Settings (Mac OS X 10.5/10.6) 1-47...
Page 63
Select desired print protocol from the Protocol pop-up menu. - For an IPP setup, select Internet Printing Protocol - IPP. - For an LPD setup, select Line Printer Daemon - LPD. - For a port 9100 setup, select HP Jetdirect - Socket. 1-48 Printer Settings (Mac OS X 10.5/10.6)
Page 64
Enter the IP address for the machine in the Address text box. - For an LPD setup, "lp" in the Queue Name text box. - For an IPP setup, "ipp" in the Queue Name text box. Check that KONICA MINOLTA magicolor 3730 is selected in the Print Using list. Click Add.
Page 65
The new printer appears in the Print & Fax screen. 1-50 Printer Settings (Mac OS X 10.5/10.6)
Specifying Page Setup Settings (Mac OS X 10.2/10.3/10.4/10.5/10.6) The following dialog box appears when Page Setup... is selected from the File menu in the application being used. Select Page Setup... from the File menu. The Page Setup dialog box appears. Select this printer in the Format for pop-up menu.
Page Attributes Options The Page Attributes section is used to specify the settings for the paper size, scaling, and print orientation. Paper Size Select the desired paper size from the Paper Size pop-up menu. Orientation Select either a vertical or horizontal page orientation for printouts. Scale If you want to enlarge or reduce the size of the printout, enter the scale ratio here (25-400%).
Specifying Custom Paper Size You can also specify a paper size that is not listed in the Paper Size pop-up menu. Select Manage Custom Sizes from the pop-up menu, in the Page Setup dialog box. The Custom Page Sizes dialog box appears. Click this button to create a new custom page size.
Page 69
After you have finished entering the settings, click OK. Regardless of which paper is selected, the printer does not print within 0.165" (4.2 mm) of the edge of the paper. 1-54 Specifying Page Setup Settings (Mac OS X 10.2/10.3/10.4/10.5/10.6)
Specifying Print Settings (Mac OS X 10.4) The following dialog box appears when Print... is selected from the File menu in the application being used. Select Print... from the File menu. The Print dialog box appears. Select this printer in the Printer pop-up menu. The Print dialog box is used to specify the following print options.
Section Description Supply Levels This section provides information for check- ing the amount of service life remaining on each consumable. Summary This is used to check the current settings. No warning message will be displayed if options cannot be used together are selected.
Copies & Pages The Copies & Pages section is used to specify the number of copies to print and the range of pages to print. Copies This specifies the number of copies to be printed. If the Collated check- box is selected, all pages in the documents are printed as sets of print- outs.
Layout The Layout section is used to specify the page layout when printing and the setting for double-sided printing. Pages per Sheet Specifies the number of pages to be printed on one sheet of paper. For example, if 2 is selected, two pages are printed on one sheet of paper. Layout Direction If you are printing more than one page per sheet, this specifies the direc- tion and order the pages should be arranged on each sheet of paper.
Scheduler The Scheduler section is used to specify the timing and priority for printing jobs. Print Document Now: Select this option to begin printing immediately. Specify the time to begin printing. On Hold: Select this option to hold the print job. Priority Select the priority for printing jobs that are being held.
Paper Handling The Paper Handling section is used to specify the pages that are to be printed and the order in which the pages are printed. Page Order Automatic: Select this option to print in the original page order of the document.
ColorSync Color Conversion Allows you to select host-based color matching or printer-based color matching. Quartz Filter Allows you to select Quartz Filter. Cover Page Print Cover Page Allows you to set cover page before or after document. Cover Page Type Allows you to select cover page type.
Paper Feed The Paper Feed section is used to specify the paper feed setting. All pages from All pages in the document are printed using the paper in the specified paper tray. First page from The first page of the document is printed on paper from a paper tray differ- ent from the tray used to print the rest of the document.
Printer Features The Printer Features section is used to specify the resolution, paper type, color options, watermark options etc., for the Basic Features, Color Match- ing Options, Image Options, Watermark Selection, Watermark Orienta- tion, and Watermark Setting feature sets. Specifying Print Settings (Mac OS X 10.4) 1-63...
Basic Features Resolution This option specifies the resolution to be used when printing a document. Line Art Select this check box to print more detailed images. Media Type This option specifies the type of paper on which the print image will be printed.
Color Matching Options Rendering Intent This option specifies the color matching settings. Perceptual: Performs suitable color matching for photographic images. Colorimetric: Performs most accurate hue color match, but the printer may replace hues it cannot reproduce. Saturation: Performs suitable color matching for business graphics. Specifying Print Settings (Mac OS X 10.4) 1-65...
Image Options Rotate Image 180 degree Select this check box to print the image rotated 180 degrees. Shift Image Select this check box to print the image shifted in the X and Y directions. X: Select the distance to shift the image in the X direction. Y: Select the distance to shift the image in the Y direction.
Watermark Orientation Watermark Orientation This option specifies the direction of the text in a watermark. User Setting Select this check box to select the angle of the watermark. Angle Select the angle of the watermark. 1-68 Specifying Print Settings (Mac OS X 10.4)
Watermark Setting Watermark Text This specifies the text in the watermark. Watermark Font This specifies the font to be used for the text in the watermark. Watermark Size This specifies the font size to be used for the text in the watermark. Watermark Color This specifies the color of the text in the watermark.
Supply Levels The Supply Levels section provides information for checking the amount of service life remaining on each consumable. The Supply Levels section appears when a printer is created on Mac OS X v10.4 with a Bonjour, IPP, LPD, Socket connection. The Supply Levels section may not appear depending on the applica- tion you use.
Select Print... from the File menu. The Print dialog box appears. From the PDF pop-up, select KONICA MINOLTA, and then select the fea- ture to be used. The Fit to Paper function is only supported in Mac OS X 10.2/10.3.
Fit to Paper Print with the paper size of the document adjusted to any paper size. When printing with the Fit to Paper feature, the image is printed centered in the paper. Specify the necessary settings, and then click Print. Booklet Printing Booklet Left Binding Select to bind the document on the left side.
Fit to Paper Original Paper Size (pt) The size of the original document (in points) is displayed. Output Paper Size Select the size of paper to be printed. Media Type Select the type of paper to be printed. Select a paper type that is compatible with the paper size being used.
Specifying Print Settings (Mac OS X 10.5/10.6) The following dialog box appears when Print... is selected from the File menu in the application being used. Select Print... from the File menu. The Print dialog box appears. Select this printer in the Printer pop-up menu. The Print dialog box is used to specify the following print options.
Section Description Scheduler This section contains options for specifying the print timing and priority of jobs. Printer Features This section contains options for specifying paper type and resolution settings. Supply Levels This section provides information for check- ing the amount of service life remaining on each consumable.
Layout The Layout section is used to specify the page layout when printing and the setting for double-sided printing. Pages per Sheet Specifies the number of pages to be printed on one sheet of paper. For example, if 2 is selected, two pages are printed on one sheet of paper. Layout Direction If you are printing more than one page per sheet, this specifies the direc- tion and order the pages should be arranged on each sheet of paper.
Two-Sided Select the desired setting for double-sided printing. Off: Double-sided printing is not performed. Long-edge binding: Double-sided printing is performed with the bind- ing along the long edge of the paper. Short-edge binding: Double-sided printing is performed with the bind- ing along the short edge of the paper.
Paper Handling The Paper Handling section is used to specify the pages that are to be printed and the order in which the pages are printed. Pages To Print All pages: Select this option to print all pages. Odd Only: Select this option to print only the pages with odd page num- bers.
Paper Feed The Paper Feed section is used to specify the paper feed setting. All pages from All pages in the document are printed using the paper in the specified paper tray. First page from The first page of the document is printed on paper from a paper tray differ- ent from the tray used to print the rest of the document.
Cover Page Print Cover Page Allows you to set cover page before or after document. Cover Page Type Allows you to select cover page type. Billing Info Allows you to set billing information printed on cover page. 1-80 Specifying Print Settings (Mac OS X 10.5/10.6)
Scheduler The Scheduler section is used to specify the timing and priority for printing jobs. Print Document Now: Select this option to begin printing immediately. Specify the time to begin printing. On Hold: Select this option to hold the print job. Priority Select the priority for printing jobs that are being held.
Printer Features The Printer Features section is used to specify the resolution, paper type, color options, watermark options etc., for the Basic Features, Color Match- ing Options, Image Options, Watermark Selection, Watermark Orienta- tion, and Watermark Setting feature sets. Basic Features Resolution This option specifies the resolution to be used when printing a document.
Color Matching Option Rendering Intent This option specifies the color matching settings. Perceptual: Performs suitable color matching for photographic images. Colorimetric: Performs most accurate hue color match, but the printer maybe replace hues it cannot reproduce. Saturation: Performs suitable color matching for business graphics. Specifying Print Settings (Mac OS X 10.5/10.6) 1-83...
Image Options Rotate Image 180 degree Select this check box to print the image rotated 180 degrees. Shift Image Select this check box to print the image shifted in the X and Y directions. X: Select the distance to shift the image in the X direction. Y: Select the distance to shift the image in the Y direction.
Watermark Orientation Watermark Orientation This option specifies the direction of the text in a watermark. User Setting Select this check box to select the angel of the watermark. Angle Select the angel of the watermark. 1-86 Specifying Print Settings (Mac OS X 10.5/10.6)
Watermark Setting Watermark Text This specifies the text in the watermark. Watermark Font This specifies the font to be used for the text in the watermark. Watermark Size This specifies the font size to be used for the text in the watermark. Watermark Color This specifies the color of the text in the watermark.
Supply Levels The Supply Levels section provides information for checking the amount of service life remaining on each consumable. The Supply Levels section appears when a printer is created on Mac OS X v10.5 with a Bonjour, IPP, LPD, Socket connection. The Supply Levels section may not appear depending on the applica- tion you use.
Troubleshooting Symptom Solution The setting in the saved Depending on the functions selected for the presets are not applied. printer, some preset settings are not saved. Media type error appears. If a media type, such as “Thick paper”, is specified for Tray 1 or Tray 2, a media type error appears and the printer stops.
Page 106
Symptom Solution When printing 2 pages on a Depending on the operating system, the single sheet of paper, the pages are not centered on the paper when pages are not centered on printing two pages on a single sheet of paper the paper.
Installing Printer Utilities on Windows You must have administrator privileges in order to install the Printer Utilities. Before proceeding with the installation, be sure to exit all running applications. The following procedure describes how to install the Printer Utilities. Administration Tools PageScope Net Care Device Manager Insert “Printer Driver and Utility”...
Ethernet Menu Location within the Configuration Menu READY MENU SPECIAL PAGES MENU LANGUAGE MENU ENGINE MENU IP ADDRESS IP ADDRESS SET NETWORK xxx.xxx.xxx.xxx AUTO IP ADDRESS SET IP ADDRESS SPECIFY xxx.xxx.xxx.xxx DHCP:xx SUBNET MASK xxx.xxx.xxx.xxx GATEWAY BOOTP:xx xxx.xxx.xxx.xxx ARP/PING:xx MAC ADDRESS 00206Bxxxxxx HTTP:xx BONJOUR:xx...
MENU SPEED/DUP/NEG. CONSUMABLE USAGE 10M/FULL/OFF MENU SPEED/DUP/NEG. INTERFACE 10M/HALF/OFF Accessing the Network Menu Use the following series of keystrokes at the printer to access the Network menu options on your printer. This menu provides access to all of the config- urable network items.
Using the Network Menu Options If the printer is connected to a network, the following settings should be spec- ified. For details about each setting, contact your network administrator. When manually setting the IP address, Subnet Mask, and Gateway turn off DHCP first. IP ADDRESS AUTO Purpose...
DHCP Purpose If there is a DHCP server on the network, specifies whether the IP address and other network information is automati- cally assigned by the DHCP server. Options Default BOOTP Purpose If there is a BOOTP server on the network, specifies whether the IP address and other network information is automatically assigned by the BOOTP server.
MAC ADDRESS Purpose Displays the MAC address for the printer. The MAC address cannot be changed. Default 00206Bxxxxxx HTTP Purpose Select whether or not to enable HTTP. If ON is selected, HTTP is enabled. If OFF is selected, HTTP is disabled. Options Default BONJOUR...
SNMP Purpose Select whether or not to enable SNMP. If ON is selected, SNMP is enabled. If OFF is selected, SNMP is disabled. Options Default FORCED MODES Purpose Select the transmission speed for the network, the commu- nication method for bi-directional communication, and the auto-negotiation setting.
Network Connection Theory To connect your printer in a TCP/IP network environment, you must make sure that the internal network addresses in the printer have been set. In many cases, you have to enter only a unique IP address. However, you may also have to enter a subnet mask and/or a gateway (router) address,...
Making the Connection Ethernet Interface An RJ45 connector can be used as the Ethernet interface for this printer. When connecting your printer to an Ethernet network, the tasks you perform depend on how you plan to set the printer’s IP (Internet Protocol) address. Printers are shipped with a preset IP address, subnet mask, and gateway.
Page 121
When the printer’s message window displays , print a configura- READY tion page to verify that the IP address is set. Press this (until) the message window displays . . . key . . . READY MENU SPECIAL PAGES PRINT CONFIG PAGE CONFIG PAGE PRINT ?
Setting the Address Manually You may also manually change the printer’s IP address, subnet mask, and gateway by using the following instructions. (See Chapter 3 “Understanding the Ethernet Configuration Menus” for more information.) When manually setting the IP address, turn off DHCP, BOOTP and ARP/PING first.
Page 123
Press this (until) the message window reads . . . key . . . IP ADDRESS 192.168.1.2 Use the keys to move to each of the four number triplets. Use the keys to increase or decrease each number. xxx.xxx.xxx.xxx IS SELECTED If you don’t set the subnet mask or gateway, go to step 5.
Page 124
If you don’t set the gateway, go to step 5. If you set the gateway, follow these steps. Press this (until) the message window displays . . . key . . . DEFAULT GATEWAY 192.168.1.1 Use the keys to move to each of the four number triplets. Use the keys to increase or decrease each number.
Page 125
Print a configuration page to verify that the correct IP address, subnet mask, and gateway have been set. Press this (until) the message window displays . . . key . . . READY MENU SPECIAL PAGES PRINT CONFIG PAGE CONFIG PAGE PRINT ? CONFIG PAGE PRINTING...
Network Printing Network printing terms are described below. Bonjour BOOTP DHCP HTTP LPD/LPR SNMP Port9100 This chapter contains descriptions on the network printing terms and the IPP printing methods. Bonjour Macintosh network technology for automatically detecting devices connected to the network and for specifying settings. Previously called “Rendezvous”, the name was changed to “Bonjour”...
HTTP HTTP (HyperText Transfer Protocol) is the underlying protocol used by the World Wide Web. It defines how messages are formatted and transmitted, and what actions web servers and browsers should take in response to vari- ous commands. For example, when you enter a URL in your browser, this actually sends an HTTP command to the Web server directing it to fetch and transmit the requested web page.
Printing via IPP (Internet Printing Protocol) You must have administrator privileges in order to install the printer driver. If the User Account Control window appears when installing on Win- dows 7/Vista/Server 2008, click the Allow button or the Continue but- ton.
Page 129
Windows Server 2003/XP—Go to step 4. Windows 2000—If you entered a valid path in the previous step, the fol- lowing message displays: “The server on which the KONICA MINOLTA magicolor 3730 printer resides does not have the correct printer driver installed.
Page 130
Choose Have Disk. Choose Browse. Locate the directory on the CD/DVD where the printer driver files are located (for example: Driver\Windows\English\WIN32), and then click Open. Click OK. Network Printing 4-13...
Page 131
Click OK. Select whether the printer is to be used as the default printer, and then click Next. 4-14 Network Printing...
Click Finish. Adding an IPP Port using Add Printer Wizard - Windows 7/Vista/Server 2008 When using Windows Server 2008, settings must be specified in the operat- ing system before the printer driver is installed. If Windows 7/Vista is being used, begin with step 6. Click the Start button.
Page 133
In the dialog box click Add a network, wireless or Bluetooth printer. In the dialog box, click The printer that I want isn’t listed. 4-16 Network Printing...
Page 134
In the URL field in the next dialog box enter the printer’s network path- name in one of the following formats and then choose Next: http://ipaddress/ipp ipp://ipaddress/ipp http://ipaddress:80/ipp http://ipaddress:631/ipp If your system cannot connect to the machine, the following message appears: “Windows cannot connect to the printer.
Page 135
Click Browse. Locate the directory on the CD/DVD where the printer driver files are located (for example: Driver\Windows\English\WIN32), and then click Open. Click OK. Click OK. 4-18 Network Printing...
Troubleshooting Symptom Action Some client functions are Install the printer driver directly on the client not available with the Point computer. and Print feature when the server is running Windows 7/Vista/Server 2008/XP/ Server 2003/2000 and the client computer is running Windows 7/Vista/Server 2008/XP/Server 2003/ 2000.
About PageScope Web Connection This chapter provides information on PageScope Web Connection, an HTTP (HyperText Transfer Proto- col)-based web page that resides in your printer and that you can access using your Web browser. This page gives you instant access to printer status and the most frequently used printer configuration options.
Page 140
You cannot access PageScope Web Connection using a local (USB ) connection. About PageScope Web Connection...
Setting Up the Printer Web Page Setting up the printer web page to run on your network involves two basic steps: Determining the name or address of your printer Setting up the “no proxy” preferences in your browser software Determining the Printer Name The printer web page can be accessed in two ways: The printer names can also be determined via WINS if the network supports it.
Our examples represent the IP address of the printer with: xxx.xxx.xxx.xxx. Always enter your printer’s IP address without lead- ing zeros. For example, 192.168.001.002 should be entered as 192.168.1.2. Internet Explorer (version 6.0 for Windows) Start Internet Explorer. From the Tools menu choose Internet Options.
Mozilla Firefox (version 3.5 for Mac OS X 10.5) Start Mozilla Firefox. From the Firefox menu choose Preferences. Click Advanced at the top of the dialog box. Click the Network tab. In the Connection section, click Settings. The Connection Settings dialog box appears.
The illustration below identifies the navigation and configuration areas of the windows that you see in PageScope Web Connection windows. Links to main Link to Printer name topics Current status KONICA MINOLTA web site Version information Click to log out of current mode...
Current Status The current status of the printer is displayed at the top of all PageScope Web Connection windows. The icon displays the type of status being displayed. Icon Status Description Examples Ready The printer is online READY and either ready to WARMING UP print or printing.
Logging on to PageScope Web Connection Login Page From the login page, select the display language and the PageScope Web Connection mode to be logged on to. As many as 100 clients can log on to PageScope Web Connection at the same time.
Language Setting If necessary, the display language used for Web Connection can be changed. Public User Mode In Public User Mode, you can view configuration settings but not change them. Select Public. Click the Login button. Administrator Mode In order to change any configuration settings through PageScope Web Con- nection, you must first enter Administrator Mode.
Page 148
Type the password in the Admin Password text box. Default password is set to “administrator”; however, once you have logged on in Administrator Mode, the password can be specified in the System - Admin Password window. Click OK button. Logging on to PageScope Web Connection 5-11...
Viewing Printer Status System Page From this page, printer information, counters and support information can be viewed. All of the information displayed on the System page is read only. 5-12 Viewing Printer Status...
Device Information Summary (previous page) The System - Device Information - Summary window provides the follow- ing information. Item Description Memory Displays the amount of memory installed in the printer. Duplex "Installed" is displayed. Paper Source Identifies the paper feed units installed on the printer.
Page 151
Item Description Paper Indicates the paper status (“Ready” or “Empty”) for each tray. Detail button Displays detailed information about the paper trays. Paper Source (Detail) The System - Device Information - Paper Source - Detail window provides the following information. Item Description Paper Source...
Page 152
Interface Information The System - Device Information - Interface Information window provides the following information. Item Description Protocol Bonjour If Enable is displayed, Bonjour is enabled. Information If Disable is displayed, Bonjour is disabled. If Enable is displayed, IPP is enabled. If Disable is selected, IPP is disabled.
Page 153
Item Description Ethernet Speed Indicates the transmission speed for the network and the transmission method for bidirectional transmission. IP Address Identifies the IP (Internet Protocol) address of the Ethernet interface. MAC Address Identifies the Media Access Control (MAC) address of the Ethernet interface. Bonjour Name Displays the Bonjour name for the printer.
Page 154
Item Description Status Indicates the remaining life of the consumables. Toner Cartridge, Transfer Belt, Transfer Roller, Fuser Unit: Percentage Waste Toner Bottle: Ready, Near Full, or Full TYPE Identifies the type of Toner Cartridge. Starter, Standard, High Viewing Printer Status 5-17...
Counter The System - Counter window provides the following information. Item Description Pages Printed Indicates the number of prints. Sheets Printed by Indicates the number of prints grouped by Paper Paper Size Size. Sheets Printed by Indicates the number of prints grouped by Paper Media Type Type.
Contact Information Displays the web address for assistance. Product Help URL Displays the web address for assistance. Corporate URL Displays the KONICA MINOLTA web address. Supplies and Accesso- Displays the web address where you can order ries printer supplies and accessories.
Print Page From this page, reports can be printed. Report Types (shown above) The Print - Report Types window provides the following information. Item Description Configuration Page Prints the printer configuration page. Menu Map Prints the menu map. Print button Sends the page to the printer.
Configuring the Printer In order to make any configuration changes through PageScope Web Con- nection, you must first enter Administrator Mode. See “Administrator Mode” on page 5-10. for instructions on logging into Administrator Mode. System Page From this page, printer information can be viewed and machine settings can be specified.
Device Information Summary (previous page) The System - Device Information - Summary window provides the follow- ing information. Item Description Memory Displays the amount of memory installed in the printer. Duplex "Installed" is displayed. Paper Source Identifies the paper feed units installed on the printer.
Page 160
Paper Source The System - Device Information - Paper Source window provides the fol- lowing information. Item Description Paper Source Identifies the paper feed units Tray 1/2 installed on the printer. Paper Size Indicates the size of paper loaded in a specific tray. Media Type Indicates the type of paper loaded in a specific tray.
Page 161
Paper Source (Detail) The System - Device Information - Paper Source - Detail window provides the following information. Item Description Paper Source Displays the names of the paper trays. Paper Size Displays the paper sizes. Media Type Displays the paper types. Capacity Displays the maximum capacity for each paper tray.
Page 162
Interface Information The System - Device Information - Interface Information window provides the following information. Item Description Protocol Bonjour If Enable is displayed, Bonjour is enabled. Information If Disable is displayed, Bonjour is disabled. If Enable is displayed, IPP is enabled. If Disable is selected, IPP is disabled.
Page 163
Item Description Ethernet Speed Indicates the transmission speed for the net- work and the transmission method for bidi- rectional transmission. IP Address Identifies the IP (Internet Protocol) address of the Ethernet interface. MAC Address Identifies the Media Access Control (MAC) address of the Ethernet interface.
Item Description TYPE Identifies the type of Toner Cartridge. Starter, Standard, High Counter The System - Counter window provides the following information. Item Description Pages Printed Indicates the number of prints. Sheets Printed by Indicates the number of prints grouped by Paper Paper Size Size.
Product Help URL Sets the help web site address for printer assis- tance. Range: Up to 127 characters Default: http://printer.konicaminolta.com Corporate URL Sets the KONICA MINOLTA corporate web site address. Range: Up to 127 characters Default: http://printer.konicaminolta.com 5-28 Configuring the Printer...
Page 166
Item Description Supplies and Accesso- Sets the web address where you can purchase ries printer supplies and accessories. Range: Up to 127 characters Default: http://www.q-shop.com Contact Phone Number Specifies the telephone number of the printer administrator. Range: Up to 31 characters Default: [Blank] Contact Address Specifies the address of the printer administrator.
Admin Password The System - Admin Password window allows you to configure the follow- ing items: Item Description Current Password Type in the current password. Range: Up to 16 characters Default: [Blank] New Password Sets a new password to enter Administrator Mode. Range: Up to 16 characters Default: [Blank] Passwords can be set to any string of...
Item Description Clear button Resets all configuration settings to previous values. Machine Settings The System - Machine Settings window allows you to configure the follow- ing items: Item Description Administrator Name Specifies the name of the administrator for the printer. Range: Up to 127 characters Default: [Blank] Device Name...
Page 169
Item Description Do Startup Page Selects whether or not a startup page is printed when the printer is turned on. Choices: On, Off Default: Off Auto Continue Selects whether or not printing continues if the size or type of paper in the selected paper tray is differ- ent from the size or type of paper for the print job.
ROM Version The System - ROM Version window provides the following information. Item Description Engine ROM Version Displays the ROM version of the printer engine. Configuration Menu Equivalent: ENGINE - ENGINE SERVICE - ENGINE VER. Controller ROM Ver- Displays the ROM version of the printer controller. sion Configuration Menu Equivalent: ENGINE - ENGINE SERVICE -...
Maintenance Clear Settings The System - Maintenance - Clear Settings page allows you to reset the printer settings to its factory defaults. Item Description Network Settings Resets the network settings to their defaults. All Settings Resets all settings to their defaults. Clear button When clicked, the message “Is it OK to restore Fac- tory Defaults?”...
Page 172
Reset Printer The System - Maintenance - Reset Printer page allows you to reset the printer controller. Item Description Reset button When clicked, the message “Is it OK to reset the Printer?” appears. Click OK to automatically restart the printer. Configuring the Printer 5-35...
Print Page From this page, timeout periods for each interface can be specified. Local Interface The Print - Local Interface window allows you to configure the following items: Item Description Network I/O Timeout Specify the length of time until input/output times out during a network connection.
Network Page This page allows you to configure network settings. For more information on these protocols, see Chapter 4 “Network Printing” TCP/IP TCP/IP (shown above) The Network - TCP/IP - TCP/IP window allows you to configure the following items. For more information on these TCP/IP, see Chapter 4 “Network Print- ing”...
Page 175
IPv4 Settings The Network - TCP/IP - IPv4 Settings window allows you to configure the following items. For more information on these TCP/IP, see Chapter 4 “Net- work Printing” Item Description Auto IP Specifies the automatic assigning method for the printer IP address.
Page 176
Item Description Subnet Mask* Sets the printer’s subnet mask address. Range: 0–255 for each xxx triplet Default: 0.0.0.0 If the specified subnet mask address is outside of the allowable range, the value is not changed, even after the Apply button is clicked. The setting returns to the previous value.
Page 177
RAW Port Settings The Network - TCP/IP - RAW Port Settings window allows you to configure the following items. For more information on these TCP/IP, see Chapter 4 “Network Printing” Item Description RAW Port Identifies the number of the printer’s RAW port. Number Choices: 1 - 65535 Default: 9100...
NETWORK - BONJOUR - BONJOUR SET Bonjour Name Specify the Bonjour name for the printer. Range: 1 to 63 characters Default: KONICA MINOLTA magicolor 3730 (xx:xx:xx) “xx:xx:xx” refers to the last six digits of the MAC address (in hexadecimal). Host Name Specify the Host name for the printer.
Item Description Apply button Applies the configuration settings in this page. Clear button Resets all configuration settings to previous values. The Network - IPP window allows you to configure the following items. For details on IPP, refer to Chapter 4 “Network Printing” In order to apply the set- tings, the printer must be turned off, then on again after the setting is speci- fied.
Page 180
Item Description Printer Name Displays the printer’s name. Range: Up to 127 characters Default: KONICA MINOLTA magicolor 3730 (xx:xx:xx) Specify the settings from the System - Machine Settings page. "xx:xx:xx" refers to the last six digits of the MAC address (in hexadecimal).
SNMP The Network - SNMP window allows you to configure the following items: Item Description SNMP SNMP v1/ If Enable is selected, SNMP v1/v2c(IP) is enabled. v2c(IP) Choices: Enable, Disable Default: Enable Configuration Menu Equivalent: NETWORK - SNMP - SNMP SET UDP Port Specifies the UDP port number.
Page 182
Item Description Apply button Applies the configuration settings for this window. Clear button Resets all configuration settings to previous values. Configuring the Printer 5-45...