Approved
Media
Weight
Duplexing
Warning
Notes
Special Note about Custom (and Oversized) Media
When printing on media that is longer than 14"/355.6 mm, use the multipur-
pose tray extender and support the media with your hands underneath while
it feeds through the multipurpose tray.
Input
Orientation Face down
Weight
Print Mode
to Select
Duplexing
Notes
Thick Stock
Media Type Thick 2
Input
Media
Use only media approved for laser products. Check
printer.konicaminolta.net/support (click on Answer Base) for
currently approved media.
16–28 lb bond (60–105 g/m²)
Supported up to 28 lb bond (105 g/m²).
Using unsupported media such as ink jet paper will result in
damaging the printer and voiding your warranty.
*For A5-size media, load up to 350 sheets only.
Printing a glossy (shinier) image on plain paper (Glossy
Plain media type) is less expensive.
Tray
Multipurpose tray only
Capacity
Up to 50 sheets, depending on the thickness of
the media
Varies
Plain Paper
Not supported
Width: 3.5"/88.9 mm up to 8.5"/215.9 mm
Length: 5.5"/139.7 mm up to 35.4"/900 mm
On media that is longer than 14"/355.6 mm, the printer
pauses for a calibration after every page.
Thick 3
Tray
Thick 2—all input sources
Thick 3—multipurpose tray only
Capacity
Up to 50 sheets, depending on the thickness of
the media
25