Konica Minolta Magicolor 3300 User Manual page 117

Symptom Cause
Irregular The media is moist
from humidity or
print or
having water spilled on
mottled
the paper supply.
image
appears.
The transfer roller or
fuser unit may be
misinstalled or
defective.
Unsupported media is
being used.
Media is The media is moist
wrinkled. from humidity or
having water spilled on
the paper supply.
The transfer roller or
fuser unit may be
misinstalled or
defective.
Unsupported media is
being used.
Solving Problems
Solution
Remove the moist media and replace it with
new, dry media.
Confirm the proper installation of the items,
and check them for damage. If necessary,
replace them.
Use KONICA MINOLTA-approved media.
See "What media types are supported?" on
page 23. Check printer.konicaminolta.net/
support (click on Answer Base) for currently
approved media.
Remove the moist media and replace it with
new, dry media.
Confirm the proper installation of the items,
and check them for damage. If necessary,
replace them.
Use KONICA MINOLTA-approved media.
See "What media types are supported?" on
page 23. Check printer.konicaminolta.net/
support (click on Answer Base) for currently
approved media.
109