Konica Minolta Magicolor 3300 User Manual page 121

Symptom Cause
Colors are The color registration
not register- or calibration is not cor-
ing prop- rect.
erly; colors
are mixed
or have
page-to-
page
variation.
The image Media is not set prop-
is offset or erly in the media
slanted. tray(s).
Unsupported media is
being used.
Media is jammed inside
the printer.
The printer is not level. Put the printer on a flat, hard, level surface
The paper path is not
clean.
Transparency (OHP)
media being fed from
the upper or optional
trays is not feeding cor-
rectly.
Solving Problems
Solution
At setup, and any time the printer is moved,
adjust the side-to-side (scan direction) color
registration. See "Color Registration" on
page 46.
Remove the media, tap it to straighten it out,
return it to the media tray, and realign the
media guides.
Use KONICA MINOLTA-approved media.
See "Media Sizes and Print Area" on page
19 for a complete
list of approved media. Check
printer.konicaminolta.net/support (click on
Answer Base) for currently approved media.
Remove any jammed media from the printer.
not to exceed ±5° slant.
Remove any tape or adhesive that may have
become lodged in the paper path.
Try loading about 100 pages of plain paper
first in the tray to give more height to the
transparency stack to reach the feed
rollers.
113