Konica Minolta Magicolor 3300 User Manual page 45

7
Open the multipurpose tray and adjust the media guides to the length and
width of the envelopes.
Attention
Improperly adjusted guides may cause poor print quality, media
jams, or printer damage.
8
Fold the flaps.
Make sure the adhesive
is dry.
9
Place the envelope stack into the
multipurpose tray with the printing-
side down.
Print envelopes on the front address
side only. Some parts of the
envelope consist of three layers of
paper—the front, back, and flap.
Anything printed in these layered
regions may be lost or faded.
Check your application documentation to determine if the flap
should be placed on the left or on the right. You can also print a
single envelope to check the orientation before printing multiple
copies.
10
Recheck the media guides to make sure they are adjusted to the width of
the envelopes.
11
Print the envelopes.
Loading Media
37