Output Tray Jams; Media Jam Fuser; Near Imaging Unit - Konica Minolta Magicolor 3300 User Manual

7
Slide the tray(s) back into the printer.

Output Tray Jams

Remove jammed media from the output tray by gently pulling it toward you. If,
after clearing the media jam, the jam message in the control panel window
persists, open and close the front cover. This should clear the jam message.

Media Jam Fuser

The MEDIA JAM FUSER message covers both the jams near the imaging unit
and the fuser unit.
WARNING!
The fuser unit is hot! Do not remove a jam in this area until the
fuser unit cools.

Near Imaging Unit

1
Open the front cover (button A)
, .
Clearing Media Jams
2
A
1
93