Konica Minolta Magicolor 3300 User Manual page 130

This message...
PUT <TYPE
MEDIA> IN
<INPUT> BIN
PUT <X> IN
INPUT <Y>
REPLACE <X>
RESETTING ACC
TO INITIAL
STATE
RESETTING
ACCOUNTING
SYS UPDATE
ERROR <X>
TRANSFER UNIT
MISSING
WAITING FOR
IDLE
WARMING UP
122
means...
Operator Control/Chain
Inputbins is set to On
and a chained tray is
empty.
The <X> specified
media is not in the input
tray <Y>.
The specified item <X>
needs to be replaced,
such as the fuser unit,
the transfer unit, and the
imaging unit.
The accounting files
have been reset.
The reset accounting
operation is in process.
The indicated error <X>
has been reported.
The transfer unit isn't
installed correctly.
An active job is in pro-
cess. Access to the
menu is not allowed
until the job is finished.
The printer is warming
up and getting ready to
go online.
Status, Error, and Service Messages
do this...
Refill the tray with the
specified type media.
Refill the tray with the
specified type media.
Replace the specified
item.
No action needed.
Wait. No other action
needed.
Verify the update
file and send it
again or check with
printer.konicaminolta.net/
support (click on Answer
Base) for the latest code
update.
Remove and reinstall the
transfer unit.
Wait until the print job is
finished and the printer
goes idle.
Wait. No other action
needed.