Replacing The Transfer Unit; How Do I Replace The Transfer Unit - Konica Minolta Magicolor 3300 User Manual

9
Pull the toner seal straight up.
Attention
Pulling the seal to the front or side
may damage the cartridge.
If the toner seal didn't pull
completely out because it was
pulled with too much force or it
was not pulled straight up while installing toner, call Technical Support.
Refer to the Service & Support Guide or www.konicaminolta.net/
printer/ to locate the office nearest you.
10
Replace the top cover.
You do not need to reset the
consumables usage monitor-
ing system when you replace a
toner cartridge
Replacing the Transfer
Unit
The transfer unit interfaces with the roller in the
imaging unit.

How do I replace the transfer unit?

1
Turn off the printer.
Attention
Do not touch black transfer rollers. They are extremely sensitive to
hand oils and scratches, both of which reduce print quality. This
type of damage is not covered by the product warranty.
If you need more room to work in, open the imaging unit cover.
60

Replacing the Transfer Unit