Introduction; Handling The Printer - Konica Minolta Magicolor 3300 User Manual

Introduction

"How do I handle the printer?"
"When does the printer need cleaning?
"What cleaning materials should I use?"
"How do I clean the density sensor?"

Handling the Printer

How do I handle the printer?
Handle the printer with care to preserve its life. Abuse may cause
damage.
Read all caution and warning labels carefully, making sure to follow any
instructions contained in them. These labels are located on the inside of
the printer's covers and the interior of the printer body.
Do not tilt the printer more than 10° in any direction while moving it.
Do not tap paper stacks on the printer.
Do not oil, lubricate, or disassemble the printer.
Do not touch the transfer roller cartridge, electrical contacts, gears, or
laser beam devices. Doing so may damage the printer and cause the print
quality to deteriorate.
Keep media in the output tray at minimum level. If the media stacks too
high, the printer may experience media jams, excessive media curl, or
built-up static. Remove transparency media as soon as it's printed.
Handle toner carefully.
Do not use partially full toner cartridges if they have been removed from
the printer and stored for a period of time. Take care to avoid toner spill-
age caused by shaking or bumping the toner cartridge.
72
For best output quality and longest consumables life, keep the printer
on a hard, flat, level (within ±5°) surface. A surface can be tested for
levelness with a standard round pencil. If the pencil rolls, the surface
is not level.
The toner is nontoxic. If you get toner on your skin, wash it off with
cool water and neutral detergent. If you get toner on your clothes,
lightly dust them off as much as possible. If some toner remains on
your clothes, use cool, not hot water, to rinse the toner off,
provided your clothing is washable.
page 72
page 74
page 74
page 76
Introduction