Clearing Media Jams; Media Jam Duplex - Konica Minolta Magicolor 3300 User Manual

Clearing Media Jams

To avoid damage, always remove jammed media gently, without tearing it.
Any pieces of media left in the printer, whether large or small, can obstruct
the paper path and cause further jams.
To avoid damage to rollers, always remove jammed media gently.
Do not reload media that has jammed.
Attention
The image is not fixed on the media before the fusing process. If you
touch the printed surface, the toner may stick to your hands, so be
careful not to touch the print face when removing the jammed media.
Make sure not to spill any toner inside the printer.
Unfused toner can dirty your hands, clothes, or anything else it gets on.
If you accidentally get toner on your clothes, lightly dust them off as much as
possible. If some toner remains on your clothes, use cool, not hot water, to
rinse the toner off, provided your clothing is washable. If toner gets on your
skin, wash it off with water or a neutral detergent.
WARNING!
If you get toner in your eyes, wash it out immediately with cool water
and consult a doctor. Material Safety Data Sheets (MSDS) information
can be found at printer.konicaminolta.net/support (click on the Answer
Base).
If, after clearing the media jam, the jam message in the control panel
window persists, open and close the front cover. This should clear the
jam message.

Media Jam Duplex

1
Open the front cover (button B)
, .
88
2
1
Clearing Media Jams
B