Symptom
Cause
Blotted
The media is moist
printing
from humidity or
occurs.
having water spilled on
the paper supply.
The transfer roller or
fuser unit may be
misinstalled or
defective.
Unsupported media is
being used.
Small
The media is too dry.
marks
occur in
or near
The transfer roller or
halftone
fuser unit may be
images.
misinstalled or
defective.
Unsupported media is
being used.
110
Solution
Remove the moist media and replace it with
new, dry media.
Confirm the proper installation of the items,
and check them for damage. If necessary,
replace them.
Use KONICA MINOLTA-approved media.
See "What media types are supported?" on
page 23. Check printer.konicaminolta.net/
support (click on Answer Base) for currently
approved media.
Remove the dry media and replace it with
new media. Store media wrapped and in a
relative humidity of at least 30%.
Confirm the proper installation of the items,
and check them for damage. If necessary,
replace them.
Use KONICA MINOLTA-approved media.
See "What media types are supported?" on
page 23. Check printer.konicaminolta.net/
support (click on Answer Base) for currently
approved media.
Solving Problems