Honda BF40D Manual page 614

31) Connect the connectors to the indicator light connector (P.
16-27).
Connect the connectors to the combination switch
1
connector (P. 16-27).
Connect the two waning buzzer connectors (P. 16-27).
2
Set the tube A over the connectors that are just connected
and clamp the tube A at the connectors securely using a
3
new harness band clip.
4
Set the tube A over the connectors that are just connected,
and clamp the meter harness A and tube A at the
5
connectors securely using a new harness band clip
[Equipped type only] (P. 16-38).
6
After clamping with the harness band clip, cut off the
excess of the band at 15 to 20 mm (0.6 to 0.8 in) from the
7
fastener end.
8
• Do not set the black connector of the combination switch
connector in the tube A.
9
[2]
BLACK CONNECTOR
10
11
12
13
[7]
14
COMBINATION
SWITCH
15
16
17
32) Connect the four meter harness connectors [Equipped type
only] (P. 16-38).
18
Set the connectors in the 40 mm cord tube and clamp the
19
tube using a new harness band clip as shown.
20 • See P. 16-27 and 16-38 for the wire colors.
After fastening the harness band clip, cut off the excess of
the band at 15 to 20 mm (0.6 to 0.8 in) from the fastener
end.
16-28
[3]
CONNECTOR
[6]
WARNING BUZZER
CONNECTORS
614
15 - 20 mm
(0.6 - 0.8 in)
[4]
HARNESS
BAND CLIP
[1]
40 mm CORD
TUBE
[3]
CONNECTOR
[1]
EXCESS
[5]
TUBE A
[2]
HARNESS
BAND CLIP