Tiller Handle - Honda BF40D Manual

2. TILLER HANDLE

1 a. REMOVAL
1) Remove the engine cover (P. 4-2).
2
2) Move the tiller handle shift lever to the "N" (Neutral)
position.
3
3) Remove the two 6 x 28 mm flange bolts, two 6 x 40 mm hex
4
bolts and the two 6 mm washers, and remove the separate
case.
5
6
7
8
9
10
11
12
4) Remove the handle cable 14P connector and the handle
13
cable 6P connector from the main relay bracket, and
disconnect the 14P connector and the 6P connector.
14
15
16
17
18
19
20
16-6
6 x 28 (2)
[2] 6 mm
WASHER (2)
[3]
6 x 40 mm HEX
BOLT (2)
[1]
HANDLE CABLE
14P CONNECTOR
[3]
MAIN RELAY
BRACKET
570
[1]
SEPARATE
CASE
[2]
HANDLE CABLE
6P CONNECTOR