Upgrade Cgm Map - Graco PCF Instructions And Parts

Maintenance

Upgrade CGM Map

NOTE: The fieldbus connection is temporarily dis-
abled during the upgrade of a map token.
1. Turn off power to the system.
2. Remove the access cover.
F . 40: Remove Access Cover
IG
3. Insert and press map token (CC) firmly into slot.
NOTE: There is no preferred orientation of token.
64
Access
Cover
TI12319A
4. Press and hold the push button for three seconds
and then release. The red indicator light (CA) will
flash twice, pause, and then once after the data map
is uploaded.
CA
CC
F . 41
IG
5. Remove map token (CC) when software has suc-
cessfully uploaded.
6. Replace access cover.
TI12320A
Push Button
313377B