Dispense From Maintenance Screen
1. Navigate to Home screen 1.
F
. 30
IG
2. Press
to enter maintenance screen.
F
. 31
IG
3. Press
to open the Control Mode drop-down
list, and select the preferred control mode. Press
again to exit the drop-down list.
313377B
4. Press
to move to the target fields. Enter the
target pressure, flow rate, and volume (dependent
on control mode) and press
5. Press
to move to the gun check boxes. Press
to select the desired guns.
6. Follow Step 2 of Manually Dispense Fluid, page
39.
Manually Dispense Fluid
1. From Home screen 1 press
nance screen.
2. Press
and verify that the gun opens.
3. Continue to press
or dispense material.
4. Press
again to exit maintenance screen.
Operation
to save.
to enter mainte-
as long as needed to load
39