Setup Mode - Graco PCF Instructions And Parts

Setup Mode

Setup mode screens are divided into four sections:
advanced setup, Gateway setup, fluid plate setup, and
style setup. While in Run mode, press
Setup mode. Press
Setup mode screens.
Advanced Setup Screens
There are three Advanced Setup screens, which enable
users to set units, adjust values, set formats, and view
software information for each component. Press
to scroll through the Advanced Setup
screens. Once in the desired Advanced Setup screen,
press to access the fields to make changes. Press
to exit edit mode.
NOTE: Users must be out of edit mode to scroll
through the Advanced Setup screens.
Advanced Setup Screen 1
This screen enables users to set the language, date for-
mat, current date and time, password, and number of
minutes before the screen saver comes on. This screen
does not automatically update for daylight savings time.
313377B
to enter
to navigate through the
Appendix A - User Interface Display
Advanced Setup Screen 2
This screen enables users to setup the maintenance
units, and flow rate.
Advanced Setup Screen 3
This screen displays the software part number and ver-
sion for the ADM, fluid plate, and Gateway module, and
USB configuration.
83