Graco PCF Instructions And Parts page 73

Replace DIN Rail Assembly
1. Prepare Control Center for Repair, page 71.
2. Remove both screws (22) and washers (28) from
the line voltage assembly cover (7). Remove the
cover.
22
7
F . 57
IG
3. Disconnect all wiring from the din rail module and fil-
ter.
4. Remove the four screws (40) from the din rail and fil-
ter.
5. Disconnect wires from rocker/rotary switch. Take
note of wire positions for easy connection in Step 7.
6. Remove the din rail, filter, and rocker switch (snaps
into place). Replace with new components. Secure
din rail and filter to the rear control center assembly
cover (1) using the four screws (40). Snap
rocker/rotary switch into position.
1
40
F . 58: 24 Vdc Din Rail Assembly
IG
313377B
28
40
40
r_pf0000_313377_10a
7. Reconnect all wiring to the din rail module, filter, and
rocker/rotary switch.
8. Reassemble the line voltage assembly cover using
the screws and washers.
Replace Fuses
Replace fuses on the din rail assembly.
• Order fuse 123677 for 24 Vdc control centers.
• Order fuse 115805 for 100-240 Vac control cen-
ters.
F . 59: Fuse Location
IG
Repair
r_pf0000_313377_10a
Fuses
73