Runcds Command Line Syntax - Nortel Meridian Companion PCI User Manual

128 Appendix D

RUNCDS Command Line Syntax

Companion Diagnostic Software for PCI User Guide
<valid CDS macro language command>
<valid CDS macro language command>
The last command in the file must be the CDS macro
language command Exit. Type:
Exit
3. Verify a macro file.
A macro file may be verified for correctness before batch
execution by using the -v option of RUNCDS. The verification
checks all commands in the macro file to ensure that the
commands are not out of sequence. Also, the verification
informs the user if extra parameters are required on the
command line.
To verify a macro, type:
RUNCDS -v <macrofile>
4. Execute the batch CDS program.
To execute the batch CDS program using the macro
<macrofile> on all of the sites in site file SITE001.TXT,
type:
RUNCDS -s1 <macrofile>
Usage
RUNCDS -n<nnn>
RUNCDS -s<nnn><macro_file> [parm2]... [parm9]
RUNCDS -v-----<macro_file> [parm2]... [parm9]
Options
-n----Create Sitename File 'nnn'.
-s----Execute CDS batch process using 'macro_file'
-------Use
-------Sitename File 'nnn'.
-v--Verify macro_file, CDS will NOT be executed.
P0886303 Issue 01 Standard