Checking The Frame; Checking The Swingarm; Checking The Throttle Cable Routing - Husqvarna FC 250 EU 2015 Owner's Manual

11 SERVICE WORK ON THE CHASSIS
11.40

Checking the frame

11.41

Checking the swingarm

11.42

Checking the throttle cable routing

–
Check the frame for cracking and deformation.
» If the frame exhibits cracking or deformation due to a mechanical impact:
–
Change the frame.
402015-01
–
Check the swingarm for damage, cracking, and deformation.
» If the swingarm shows signs of damage, cracking, or deformation:
–
Change the swingarm.
500285-01
Preparatory work
–
Remove the seat. (
–
Remove the fuel tank.
Main work
–
Check the throttle cable routing.
Both throttle cables must be routed to the throttle valve body side by side behind
the handlebars and above the fuel tank bearing.
» If the throttle cable is not routed as specified:
–
Correct the throttle cable routing.
M00276-01
Finishing work
–
Install the fuel tank.
–
Mount the seat. (
Info
A frame that has been damaged due to a mechanical impact must
always be changed. Repair of the frame is not authorized by Husq-
varna.
Info
A damaged swingarm must always be changed. Repair of the
swingarm is not authorized by Husqvarna.
p. 42)
( p. 47)
( p. 48)
p. 43)
53