Changing The Glass Fiber Yarn Filling Of The Main Silencer - Husqvarna FC 250 2016 Repair Manual

Chan lass fiber yarn fillin of the main silencer
Warning
Danger of burns The exhaust system gets very hot when the vehicle is driven.
-
Allow the exhaust system to cool down before performing any work on the vehicle.
Info
Over time, the fibers of the glass fiber yarn escape and the damper "burns" out.
Not only is the noise level higher, the performance characteristic changes.
402618-10
O.
-
Tighten screws
Guideline
Remaining screws,
chassis
Finishing work
-
Install the right side cover.
Preparatory work
-
Remove the right side cover.
-
Remove the main silencer.
Main work
-
Remove all screws on the main silencer.
Q.
-
Take off silencer cap
-
Take off outer tube@}.
-
Pull glass fiber yarn filling
-
Clean the parts that need to be reinstalled and check for
damage.
-
Mount the new glass fiber yarn filling
8
-
Slide outer tube over the glass fiber yarn filling.
O
-
Insert silencer cap into the outer tube.
-
Mount and tighten all of the screws.
Guideline
Screws on the main
silencer
Finishing work
-
Install the main silencer.
-
Install the right side cover.
10 Nm (7.4 lbf ft)
M6
(ll!;!I p. 94)
(ll,ll p. 94)
(ll,ll p. 88)
e.
(D
off of inner tube
(D
on the inner tube.
M5 7 Nm (5.2 lbf ft)
(@}J p. 88)
(@}J p. 94)
10 EXHAUST
89