Disassembling The Damper - Husqvarna FC 250 2016 Repair Manual

9 SHOCK ABSORBER, SWINGARM
9.14
62
Disassembling the dam�er
Preparatory work
-
Remove the spring.(� p. 61)
Main work
-
Make a note of the present state of rebound
8 .
pression damping
-
Open the adjusters of the rebound and compression damp­
ing completely.
@).
-
Slowly open screw
✓ The nitrogen pressure dissipates.
8.
-
Remove locking cap
-
Press in seal ring retainer
I Pressing tool (T1216) (lll:!l
O
and com­
0
using the special tool.
p. 297)