Checking The Wheel Bearing For Play; Checking The Brake Discs - Husqvarna FC 250 2016 Repair Manual

Checking the wheel bearing for Ria�
14.3

Checking the brake discs

Warning
Danger of accidents
-
Make sure that worn-out brake discs are replaced immediately.
If the tires are more than 5 years old:
-
Change the tires.
Preparatory work
-
Raise the motorcycle with a lift stand.
-
Place a load on the rear of the vehicle.
✓ The front wheel is not in contact with the ground.
Main work
-
Move the front wheel from side to side.
Info
Hold the fork leg to check it.
If there is detectable play:
-
Change front wheel bearing.
-
Place a load on the front of the vehicle.
✓ The rear wheel is not in contact with the ground.
-
Move the rear wheel from side to side.
Info
Hold the swingarm to check it.
If there is detectable play:
-
Change the rear wheel bearing.
D00538-10
Finishing work
-
Remove the motorcycle from the lift stand.
Worn-out brake discs reduce the braking effect.
-
Check the front and rear brake disc thickness at multiple
points for the dimension
rC.n�\
Info
Wear reduces the thickness of the brake disc around
\ • · • ' /
the contact surface of the brake linings.
........ �
....
Brake discs - wear limit
H00938-10
If the brake disc thickness is less than the specification:
-
Change the front brake disc.
-
Change the rear brake disc.
(I!!,!
G.
front I 2.5 mm (0.098 in)
rear I 3.5 mm (0.138 in)
(!i.,!l
14 WHEELS
(l!!:!J p. 12)
p. 115)
(l!!:!J p. 125)
(l!!:!J p. 12)
(!i.,!l p. 114)
p. 118)
111